High-Voltage Condenser Insulation Paper
Specialty uncoated kraft paper sheets for high-voltage condenser separators, featuring low electrical conductivity and high breakdown voltage. Weighing 120 g/m² or less with sulfate pulp base, it's engineered for transformer and capacitor manufacturing. HTS 4804.39.20.00 designates it as condenser paper within other kraft ≤150 g/m².
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If mainly from recovered waste paper with Mullen burst ≥2 kPa·m²/g
Recycled pulp papers classify in 4805.24/25; virgin kraft stays in 4804.
If for sack kraft specs in 60-115 g/m² range
Sack kraft meets specific stretch/tear indices for bags; condensers do not.
If filter paper variant with honeycomb weave
Perforated or filter paper articles fall in 4823; plain condenser sheets remain paper.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document compliance with ASTM dielectric standards; customs may request proof it's not generic writing paper
• Declare in rolls/sheets only; punched/perforated versions risk Chapter 4823 Jacquard card classification
• Monitor for printing; motif-printed paper shifts to Chapter 49 per chapter notes
Related Products under HTS 4804.39.20.00
Electrical Condenser Tissue Paper
Ultra-thin, high-purity kraft paper designed specifically for use as dielectric insulation in electrical capacitors and condensers. It is uncoated, weighs under 150 g/m², and meets the precise dielectric strength requirements for high-voltage applications. Classified under HTS 4804.39.20.00 as condenser paper, a specialized kraft paperboard not covered by headings 4802 or 4803.
Capacitor Grade Kraft Condenser Paper
High-tensile kraft paper in rolls, optimized for oil-filled electrical condensers with superior insulation properties. Uncoated and ≤150 g/m², it consists of ≥80% sulfate process fibers tailored for dielectric separation in power electronics. Falls under HTS 4804.39.20.00 as other kraft paper specifically for condensers.
Dielectric Kraft Paper for Electrolytic Condensers
Thin uncoated kraft tissue paper used as separator in aluminum electrolytic capacitors, with precise thickness control for electrolyte absorption. At 40-150 g/m² from sulfate wood fibers, it provides essential dielectric function. Classified precisely as condenser paper in HTS 4804.39.20.00.
Transformer Condenser Separator Paper
Uncoated kraft paperboard in rolls for insulating layers between windings in oil-immersed power transformers and condensers. ≤150 g/m² with high purity sulfate fibers ensures minimal tan delta for electrical performance. HTS 4804.39.20.00 covers this as specialized other kraft condenser paper.
Power Capacitor Insulation Kraft Paper
High-density uncoated kraft paper sheets for metallized film power capacitors, offering robust dielectric withstand under AC stress. Weight-controlled at 150 g/m² max with ≥80% chemical sulfate fibers per kraft definition. Designated HTS 4804.39.20.00 for condenser-specific kraft paperboard.
Synthetic Oil Compatible Condenser Paper
Kraft-based uncoated paper engineered for compatibility with synthetic dielectric oils in modern condensers, ≤150 g/m² in roll form. Provides stable insulation without degradation in PCB-free capacitors. HTS 4804.39.20.00 classifies it as condenser paper within kraft parameters.