Glulam Structural Timber Column
Glued laminated timber columns are fabricated by gluing multiple layers of dimensional lumber to create curved or straight structural supports for buildings. Classified under HTS 4418.99.91.40 as other fabricated structural wood members due to their engineered composition for vertical load-bearing. Ideal for exposed architectural features in modern construction.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If supplied as unlaminated sawn timber
Coniferous sawn wood without gluing or fabrication is classified under heading 4407.
If for cellular or particleboard-based members
Structural members from reconstituted wood panels use different subheadings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include engineering specifications and load ratings in import documentation to prove structural intent
• Check for kiln-drying certificates to meet ISPM 15 fumigation standards for wood packaging
Related Products under HTS 4418.99.91.40
Laminated Veneer Lumber (LVL) Beam
Laminated veneer lumber beams are engineered structural members made by bonding thin wood veneers with adhesives under heat and pressure, providing high strength for load-bearing applications. They fall under HTS 4418.99.91.40 as fabricated structural wood members used in construction framing and support. These beams are prefabricated for direct installation in residential and commercial buildings.
Prefabricated Wood Roof Truss Chord
Prefabricated truss chords are elongated structural members cut, drilled, and joined for use in roof truss assemblies, providing tensile and compressive strength. Falls under HTS 4418.99.91.40 as other fabricated structural wood members prior to full truss assembly. Used in modular housing construction.
Finger-Jointed Stud Lumber
Finger-jointed studs are short lumber pieces end-joined with finger joints and dried to form continuous structural wall framing members. HTS 4418.99.91.40 covers these fabricated structural wood products for vertical load-bearing in light-frame construction. Reduces waste and provides uniform quality.
Pre-Cut Metal-Plate Connected Rafter
Pre-cut rafters are structural wood members with notches and metal connector plates for rapid roof framing assembly. Classified under HTS 4418.99.91.40 as fabricated structural wood for sloped roof support. Streamlines on-site construction.
Mass Plywood Panel (MPP) Structural Beam
Mass plywood panels are cross-laminated plywood sheets fabricated into structural beams for walls, floors, and roofs in tall wood buildings. Under HTS 4418.99.91.40 as fabricated structural wood members with superior dimensional stability. Key for cross-laminated timber (CLT) alternatives.
Engineered Wood I-Joist
Wood I-joists consist of top and bottom flanges of lumber or LVL connected by an OSB web, fabricated for floor and roof framing. They qualify under HTS 4418.99.91.40 as fabricated structural wood members engineered for long-span applications. Lightweight and dimensionally stable for residential construction.