Radiata Pine Laminated Plywood Panel 12mm
12mm thick plywood panel with Radiata pine coniferous wood for outer plies, grain visible through clear protective coating. Falls under HTS 4412.99.8100 for other coniferous plywood not obscuring wood texture. Ideal for furniture framing and interior paneling.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If with at least one outer ply of eucalyptus or other non-conifer
Mixed wood plies shift to other plywood subheadings excluding pure coniferous outer.
If made from fiberboard rather than veneer laminates
Density-based materials classify under 4411 for fibreboard products.
If imported as thin veneer sheets, not full plywood panels
Veneer layers under 6mm thick and unlaminated go to heading 4408.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document binder content under 3% if any agglomeration noted in production process
• Use precise species identification (e.g
• Pinus radiata) to confirm coniferous status
Related Products under HTS 4412.99.81.00
SPF Pine Plywood 3/4 Inch 4x8 Sheet
Standard plywood panel made with spruce-pine-fir (SPF) coniferous wood for both outer plies, measuring 3/4 inch thick by 4 feet by 8 feet. Not surface-covered or covered only with transparent film that reveals wood grain, fitting 4412.99.8100 as other plywood with coniferous outer plies. Commonly used for construction sheathing and subflooring.
Douglas Fir Plywood Sheathing 5/8 Inch
Construction-grade plywood with Douglas fir coniferous outer plies, 5/8 inch thick, exposed wood grain suitable for exterior sheathing. Classified under 4412.99.8100 as other not surface-covered plywood with coniferous face and back plies. Meets building code standards for structural applications.
Lodgepole Pine Utility Plywood 1/2 Inch
Utility-grade 1/2 inch plywood featuring lodgepole pine coniferous outer plies, no opaque covering to show natural markings. Classified 4412.99.8100 as other coniferous plywood. Suitable for crates, pallets, and general woodworking.
Western Larch Plywood Subfloor 23/32 Inch
23/32 inch tongue-and-groove plywood with western larch coniferous outer plies, clear surface exposing markings. Fits 4412.99.8100 as other plywood category. Designed for durable subflooring in flooring systems.
Sitka Spruce Aircraft Plywood 1/8 Inch
Lightweight 1/8 inch plywood using Sitka spruce coniferous veneers for outer plies, untreated surface showing grain. 4412.99.8100 classification for other thin coniferous plywood. Used in model aircraft and specialty applications.
Hem-Fir Mixed Plywood 19/32 Inch Structural
Structural plywood from hem-fir mixed coniferous stands per subheading note, 19/32 inch thick with exposed grain. HTS 4412.99.8100 applies to this other plywood with coniferous outer plies, transparent surface only. Used in roofing and wall sheathing.