Birch Exterior Plywood Panel
Water-resistant plywood with birch face and back veneers (nonconiferous), phenolic resin bonding, and softwood core, sized 5x10 feet. Falls under HTS 4412.92.4210 as 'other' plywood with nonconiferous outer ply, sanded but not further manufactured. Ideal for outdoor furniture and siding applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If containing over 6mm per ply
Thicker individual veneers qualify for the specific thickness subheading.
If imported as unsanded sheets
Not sanded or finger-jointed veneer sheets classify under heading 4408.
If bamboo outer plies used
Bamboo, per Chapter Note 2, treated as wood but may route to specific bamboo plywood provisions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Declare bond type (e.g
• phenolic) and provide test data confirming weather resistance if marketed as exterior
• Ensure accurate thickness measurement; panels over 6mm per ply risk reclassification
• Label with country of manufacture and species to prevent disputes over nonconiferous status
Related Products under HTS 4412.92.42.00
Poplar Plywood Sheet 4x8
Standard 3/4-inch thick plywood panel measuring 4 feet by 8 feet, with outer plies made from poplar (nonconiferous hardwood) and inner core of mixed softwood veneers. Classified under HTS 4412.92.4210 as plywood with at least one outer ply of nonconiferous wood, not further worked than sanded. Used commonly for cabinetry and furniture construction.
Okoume Marine Grade Plywood
BS1088 standard marine plywood with okoume (nonconiferous tropical hardwood) face veneers, waterproof glue, and meranti core, typically 4mm-25mm thick. HTS 4412.92.4210 applies to this sanded plywood not specially designed for flooring or ceiling. Used in boat building and humid environments.
Alder Cabinet Plywood 1/2-inch
1/2-inch thick plywood with matching alder veneers on both faces (nonconiferous), hardwood core, sanded finish for paint grade applications. Classified HTS 4412.92.4210 as other plywood with nonconiferous outer ply. Primarily used for kitchen cabinets and millwork.
Mixed Hardwood Utility Plywood
Industrial-grade plywood with rotating nonconiferous hardwoods (maple, cherry, etc.) as outer plies, utility core, 18mm thickness. HTS 4412.92.4210 for sanded plywood not otherwise specified. Suitable for shelving, subflooring, and pallets.
Eucalyptus Face Plywood Panel
Sanded plywood panels with eucalyptus (nonconiferous) face veneer, poplar core, and lauan back, standard 1220x2440mm size. HTS 4412.92.4210 applies as other plywood with nonconiferous outer ply. Used for decorative paneling and formwork.
Mahogany Utility Plywood 3/4-inch
3/4-inch utility plywood featuring mahogany outer plies (nonconiferous), rough sanded surface, softwood core for cost efficiency. Classified under HTS 4412.92.4210 as sanded plywood, other category. Common in furniture underlayment and crating.