Okoume Plywood 12mm Utility Grade
Plywood panels featuring tropical okoume (nonconiferous) outer plies over poplar core, in utility grade with natural grain visible through clear coating. HTS 4412.92.31 applies to this 'other' plywood not surface-covered obscuring markings, excluding coniferous plies. Used for packaging crates and formwork.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If both outer plies are tropical hardwood species
Full tropical wood outer plies qualify for specific 4412.92.90 rather than 'other' category.
If particleboard construction rather than veneered plywood
Particleboard with wood outer plies falls under heading 4410, based on core material.
If when cut and shaped into finished doors
Assembled wooden doors from this plywood classify under 4418.20 as builder's joinery.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain CITES permits if okoume harvest exceeds sustainable quotas, preventing import delays
• Document core vs outer ply composition to distinguish from full tropical wood panels
• Avoid palletizing with coniferous wood spacers that could trigger mixed-material scrutiny
Related Products under HTS 4412.92.31
Poplar Plywood 3/4 Inch 4x8 Sheet
Standard plywood panel made with at least one outer ply of nonconiferous poplar wood, not surface-covered or covered only with transparent material that reveals the grain. Classified under HTS 4412.92.31 as plywood with nonconiferous outer ply, excluding coniferous species like pine or spruce. Commonly used for cabinetry and furniture construction.
Birch Marine Plywood 18mm 1220x2440mm
Water-resistant plywood with birch (nonconiferous) outer plies, glued with WBP phenolic resin, not surface-covered beyond clear protective coating. Falls under HTS 4412.92.31 for plywood featuring nonconiferous face veneers without obscuring grain. Ideal for boat building and humid environments.
Radiata Pine Core Poplar Face Plywood 15mm
Structural plywood with poplar (nonconiferous) face veneers over radiata pine core, clear-coated to show grain texture. Classified HTS 4412.92.31 for having at least one nonconiferous outer ply, not obscuring markings. Popular for underlayment and shelving.
Eucalyptus Plywood 5/8 Inch Construction Grade
Plywood featuring eucalyptus (nonconiferous hardwood) outer plies for sheathing applications, with transparent sealer only. Under HTS 4412.92.31 as other plywood with nonconiferous face ply, grain visible. Used in framing and subflooring.
Aspen Hardwood Plywood 9mm Speaker Cabinet Grade
Lightweight plywood with aspen (nonconiferous) outer veneers optimized for acoustic properties, clear finished. HTS 4412.92.31 for plywood featuring nonconiferous outer ply without obscuring surface markings. Specifically for professional audio enclosures.
Mixed Hardwood Plywood 3-Ply 10mm
Three-ply construction plywood with nonconiferous hardwood outer plies (poplar/alder blend), utility finish showing grain. Fits HTS 4412.92.31 as other plywood with at least one nonconiferous outer ply, not surface-covered. General construction and DIY applications.