Birch Face Plywood Sheet 4x8 Feet 3/4 Inch
This is a standard plywood panel measuring 4 feet by 8 feet with a thickness of 3/4 inch, featuring a face ply of birch (Betula spp.) wood and not surface-covered to preserve the natural grain. It falls under HTS 4412.92.11.30 because it is plywood with at least one outer ply of nonconiferous wood (birch), not surface-covered, and the face ply is specifically birch. Commonly used for cabinetry, furniture, and interior paneling where the birch veneer provides aesthetic appeal.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the face ply is not birch but another nonconiferous species like poplar
Plywood with nonconiferous outer ply excluding birch falls under the general 'other' subheading within the same plywood category.
If both outer plies are of coniferous wood like pine or spruce
Classification shifts to coniferous plywood heading when at least one outer ply is coniferous, regardless of core composition.
If assembled into finished cabinets or furniture components
Assembled wooden furniture or parts thereof are classified under Chapter 94 headings rather than as raw plywood panels.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify the face ply is genuine birch (Betula spp.) via species certification to avoid misclassification; provide mill test reports or lab analysis if requested by customs
• Ensure formaldehyde emission levels comply with U.S
• TSCA Title VI standards for composite wood products; include CARB Phase 2 or EPA certification documentation
• Measure and declare exact thickness and dimensions accurately, as exceeding certain limits may shift classification to different subheadings
Related Products under HTS 4412.92.11.30
Birch Plywood Cabinet Grade Panel 1220x2440mm 18mm
Metric-sized birch-faced plywood panel (1220mm x 2440mm, 18mm thick) designed for high-quality cabinetry applications, with the birch face ply exposed and not surface-covered. Classified under HTS 4412.92.11.30 due to its plywood construction, nonconiferous birch outer ply, and lack of opaque surface covering that would obscure the wood grain. Ideal for kitchen cabinets, wardrobes, and shop fitting.
Baltic Birch Plywood 5x5 Feet 1/2 Inch Utility Grade
Baltic birch plywood panel (5x5 feet, 1/2 inch thick) known for its all-birch ply construction with a birch face, not surface-covered to maintain natural appearance. It qualifies for HTS 4412.92.11.30 as plywood featuring a nonconiferous birch outer ply without surface covering, sourced typically from Baltic regions. Used in utility applications like jigs, fixtures, and scroll saw work.
Russian Birch Plywood BB/BB Grade 12mm 4x8
Russian-sourced birch plywood with BB/BB grade (minor defects permitted), 12mm thick in standard 4x8 foot size, featuring exposed birch face ply not surface-covered. Falls under HTS 4412.92.11.30 for its nonconiferous birch outer ply plywood construction without opaque coverings. Popular for furniture framing and structural panels.
Finnish Birch Exterior Plywood 15mm 2500x1250mm
Exterior-grade Finnish birch plywood panel (15mm thick, 2500x1250mm) with birch face ply, not surface-covered, suitable for weather-exposed applications due to phenolic glue. Classified in HTS 4412.92.11.30 as nonconiferous birch-faced plywood without surface covering obscuring the grain. Used for signage, outdoor furniture bases, and marine applications.
Birch Marine Plywood Lloyds Approved 19mm 8x4
Lloyd's Register approved birch marine plywood (19mm thick, 8x4 feet) featuring a birch face ply without surface covering, built with waterproof glue for boat building. It meets HTS 4412.92.11.30 criteria as plywood with nonconiferous birch outer ply, not surface-covered. Essential for hulls, decks, and interior boat fit-out.
Sliced Birch Veneer Plywood Panel 9mm 4x8
Plywood panel with sliced birch veneer face (9mm total thickness, 4x8 feet) not surface-covered, providing premium figured grain patterns. Classified under HTS 4412.92.11.30 for its birch (Betula spp.) nonconiferous outer ply plywood form without coverings. Used in high-end furniture and architectural millwork.