Birch Face Plywood Panel 3mm x 1m x 2m
Thin birch-faced plywood panel measuring 3mm thick, 1m wide, and 2m long, constructed with at least one outer ply of nonconiferous birch wood and inner layers of mixed wood veneers. Not surface-covered or covered only with transparent material that reveals the birch grain and texture. Classified under HTS 4412.92.11.20 due to its specific dimensions, birch face ply, and plywood construction without obscuring outer ply markings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If panels exceeding specified dimensions
Larger birch-faced plywood panels fall under the general 'other' category without size restrictions in the same heading.
If all plies are tropical wood
Plywood with only tropical hardwood plies, even birch-faced, classifies under coniferous/tropical wood specific heading.
If surface-covered with opaque decorative material
Panels with non-transparent surface coverings like laminates or prints are classified as reconstructed wood/beadings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify birch species (Betula spp.) documentation from supplier to confirm nonconiferous outer ply classification
• Measure panels precisely before shipment; exceeding 3.6mm thickness, 1.2m width, or 2.2m length shifts to other subheadings
• Ensure no opaque surface coverings; transparent films are allowed only if grain visibility is maintained to avoid reclassification
Related Products under HTS 4412.92.11.20
Birch Veneer Plywood Sheet 2.5mm x 1.2m x 1.5m
Laminated plywood sheet with birch outer ply, 2.5mm thickness, 1.2m width, and 1.5m length, ideal for cabinetry backs and furniture panels. Features clear grain visibility with no obscuring surface treatment. Meets HTS 4412.92.11.20 as thin birch-faced plywood within exact dimensional limits and nonconiferous face ply.
Thin Birch Plywood for Model Making 1.5mm x 0.8m x 1.8m
Ultra-thin 1.5mm birch-faced plywood panel (0.8m x 1.8m) used for architectural models and hobby crafts, featuring natural birch grain texture. Laminated construction with nonconiferous birch outer ply, no obscuring surface cover. Fits HTS 4412.92.11.20 precisely due to small dimensions and birch face specifications.
Birch Face Cabinet Back Plywood 3.6mm x 1.1m x 2.1m
Maximum-spec birch plywood panel at 3.6mm thick, 1.1m wide, 2.1m long, designed for furniture cabinet backs with visible grain finish. Outer ply of nonconiferous birch, laminated core, transparent coating only. Classified in HTS 4412.92.11.20 for adhering to exact size limits and surface requirements.
Aircraft Interior Birch Plywood Panel 2mm x 1m x 2m
Lightweight 2mm birch-faced plywood (1m x 2m) for aircraft cabin paneling, featuring high-quality nonconiferous birch outer ply and clear varnish preserving natural markings. Meets strict dimensional specs for thin laminated wood. HTS 4412.92.11.20 applies due to birch face, size constraints, and non-obscured surface.
Birch Plywood Wall Paneling Sheet 3.2mm x 1.15m x 2.15m
Decorative birch plywood for interior wall paneling, 3.2mm x 1.15m x 2.15m, with premium Betula spp. face ply visible through clear protective coat. Laminated from thin veneers per plywood standards. Precisely matches HTS 4412.92.11.20 for thin birch-faced panels without grain-obscuring coverings.