Premium Birch Plywood with Tropical Backer 10mm
10mm premium grade plywood showcasing birch (Betula spp.) face ply with tropical hardwood backer, transparent lacquer finish. Classified HTS 4412.91.10: meets birch face, tropical ply, and texture-visible criteria. For high-end millwork and store fixtures.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If other non-tropical face veneers
Pure temperate hardwood plywood without tropical plies uses different other category.
If agglomerated as wood pellets byproduct
Raw agglomerated wood waste classifies under fuel/processing materials.
If pre-molded into forms
Tableware or kitchenware molded plywood goes to Chapter 44 end-use.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Request mill test reports for grade; check binder content under 3%; use moisture barriers in containers
Related Products under HTS 4412.91.10
Birch Face Baltic Birch Plywood 1/4 Inch
Baltic birch plywood featuring a visible birch (Betula spp.) face ply over multiple birch core layers, with transparent coating preserving grain visibility. Classified under HTS 4412.91.10 as plywood with birch face ply, not surface-covered or with clear coating obscuring grain, and at least one tropical outer ply in the construction. Ideal for cabinetry and furniture making.
Birch Veneer Marine Grade Plywood 3/4 Inch
Marine-grade plywood with birch (Betula spp.) face ply for moisture resistance, featuring tropical hardwood outer ply and clear waterproof sealant. Falls under HTS 4412.91.10 due to birch face visibility, tropical wood ply, and non-obscuring surface treatment. Used in boat building and outdoor applications.
Clear Coated Birch Plywood for Furniture 12mm
Furniture-grade plywood panel with birch (Betula spp.) face ply atop tropical hardwood core, finished with transparent UV-resistant coating. HTS 4412.91.10 applies as it has a birch face, tropical outer ply, and surface preserves wood grain markings. Commonly used for flatpack furniture components.
Birch Face Okoume Core Plywood 18mm
Structural plywood with birch (Betula spp.) face and okoume (tropical) outer ply, natural finish highlighting grain. Classified in HTS 4412.91.10 for birch-faced plywood with tropical plies and no obscuring surface cover. Suited for interior construction and millwork.
UV Protected Birch Plywood Panel 5x5 Foot
Large-format 5x5 foot plywood sheet with birch (Betula spp.) face ply, tropical hardwood backing, and UV-transparent protective film. Meets HTS 4412.91.10 criteria: birch face, tropical ply, grain-visible surface. Used for signage and display fabrication.
Birch Topped Lauan Plywood 1/2 Inch
1/2-inch plywood featuring birch (Betula spp.) top ply over lauan tropical hardwood, with light transparent sealer. HTS 4412.91.10 due to birch face, tropical outer ply, and non-obscuring finish exposing texture. Popular for shelving and partitioning.