Sapele Plywood with Birch Face for Furniture
19mm multi-layer plywood featuring Betula birch face ply and sapele mahogany tropical outer ply, used in premium furniture manufacturing. Clear coating preserves visible grain, texture, and markings as required. HTS 4412.91.1040 applies to this other not surface-covered configuration.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If plies exceed 6mm thickness throughout
Thick tropical wood plies (over 6mm) classify under 4412.99 other thick plywood category.
If machined with tongue-and-groove edges
Profiled or worked plywood with joints for assembly becomes 4417 worked wood products.
If dark red meranti veneers only, under 6mm total
Thin veneers of specific tropical woods like meranti classify as sheets under 4408.31, not plywood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Maintain chain-of-custody documentation tracing tropical sapele sourcing for Lacey Act compliance
• Separate tropical plywood from non-tropical in shipments to avoid entire lot reclassification
• Conduct pre-shipment inspection for delamination common in tropical plywood humidity exposure
Related Products under HTS 4412.91.10.40
Birch Face Tropical Plywood Panel 4x8 ft
A 3/4-inch thick plywood sheet measuring 4 feet by 8 feet with a birch (Betula spp.) face ply and at least one outer ply of tropical hardwood like okoume. Not surface-covered or covered only with transparent material that reveals the birch grain and texture. Classifies under 4412.91.1040 as other plywood with birch face ply and tropical outer ply.
Okoume Core Birch Face Plywood Sheet
Standard 18mm okoume plywood with premium birch veneer face ply from Betula spp., designed for cabinetry and furniture. At least one outer ply uses tropical okoume wood; no surface covering or only clear UV-resistant coating preserving birch markings. Meets 4412.91.1040 as other not surface-covered plywood with specified plies.
Meranti Back Birch Top Plywood for Shelving
12mm plywood panel with birch (Betula spp.) top face ply and dark red meranti tropical hardwood backing ply, ideal for retail shelving units. Grain and texture visible through optional clear lacquer only. Fits HTS 4412.91.1040 criteria for other birch-faced tropical plywood not obscuring surface features.
Balau Outer Birch Veneer Plywood Cabinet Board
High-quality 15mm plywood with genuine birch face (Betula spp.) and balau tropical hardwood outer ply for kitchen cabinet doors. Surface either uncovered or with transparent oil finish showing natural birch texture. Precisely classified in 4412.91.1040 as other specified plywood type.
Keruing Tropical Birch Face Utility Plywood
Structural 5/8-inch plywood with birch Betula face and keruing tropical hardwood ply for utility shelving and workbenches. No surface treatment or transparent sealer only, maintaining grain visibility. Classifies specifically under HTS 4412.91.1040 other plywood subcategory.
Mixed Tropical Birch Plywood Speaker Cabinets
3/4-inch plywood sheets with Betula birch face ply and mixed tropical hardwood outer layers (lauan/keruing) for professional speaker enclosure panels. Transparent grain-enhancing finish only. HTS 4412.91.1040 for other birch face tropical plywood configurations.