Birch Face Ply Tropical Plywood Sheet 4x8 ft 3/4 inch
This plywood panel features a birch (Betula spp.) face ply with inner plies including at least one layer of tropical hardwood like mahogany, not surface-covered to preserve natural grain visibility. It measures 4x8 feet and 3/4 inch thick, ideal for custom cabinetry and furniture construction. Classified under HTS 4412.91.1030 due to the birch outer ply, tropical wood inner ply, and lack of opaque surface covering.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If no tropical wood plies used
Plywood with only non-tropical outer plies like birch throughout falls under other wood subheading, excluding tropical components.
If surface-covered with opaque laminate or veneer
Surface-covered plywood shifts to different subheading regardless of ply composition if covering obscures grain.
If imported as thick sheets exceeding plywood definition
Thicker veneered panels or sheets not qualifying as laminated plywood may classify as veneer or sheets under heading 4408.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species documentation proving birch (Betula spp.) face ply and at least one tropical wood inner ply to avoid reclassification
• Provide mill certificates confirming no surface covering obscures grain; common pitfall is mislabeling transparent coatings as 'clear'
• Check CITES permits if tropical plies include restricted species like teak or mahogany
Related Products under HTS 4412.91.10.30
Mahogany Core Birch Plywood Panel 1220x2440mm 18mm
Structural plywood with birch face and back plies over mahogany tropical core layers, unsurfaced to show birch grain texture. Sized 1220x2440mm at 18mm thickness for furniture framing and interior fitouts. Meets HTS 4412.91.1030 as not surface-covered plywood with birch face ply and tropical wood content.
Teak Inner Ply Birch Marine Plywood 12mm
Marine-grade plywood with exterior birch plies and water-resistant teak tropical inner plies, left unsanded and uncovered. Used for boat interiors and humid environments at 12mm thickness. Fits HTS 4412.91.1030 for uncovered birch-faced plywood containing tropical wood.
Okoume Inner Birch Face Structural Plywood 19/32 inch
Structural-rated plywood with birch face ply over Okoume tropical hardwood inner veneers, unsurface-covered. 19/32 inch thickness in standard dimensions for framing applications. Classifies in HTS 4412.91.1030 as plywood with birch outer ply, tropical wood, no obscuring cover.
Meranti Ply Birch Faced Cabinet Plywood 12mm
High-quality cabinet-grade plywood featuring birch face ply with dark red meranti tropical inner plies, maintained uncovered. 12mm thickness for drawer bottoms and shelving. HTS 4412.91.1030 designation for grain-visible birch-faced tropical plywood.
Keruing Core Birch Utility Plywood 18mm EU Standard
Utility grade plywood with birch (Betula spp.) outer ply over keruing (Dipterocarpus spp.) tropical core, no surface covering applied. 18mm thickness meeting EN standards for general construction. Covered by HTS 4412.91.1030 for uncovered tropical-containing birch plywood.
Balau Tropical Core Birch Plywood 15mm 4x8
Balau (Shorea spp.) tropical hardwood core with select birch veneer face ply, no surface treatment applied. Standard 4x8 foot size, 15mm thick for shop fitting and display fixtures. HTS 4412.91.1030 applies to this uncovered, birch-faced, tropical-containing plywood.