Lodgepole Pine Blockboard
Heavy-duty blockboard with Lodgepole pine core blocks and matching coniferous veneers, 38mm thick for load-bearing uses. HTS 4412.59.95.00 applies to this other blockboard with coniferous faces, suitable for shelving and racking systems. Core blocks exceed 6mm width per construction definition.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If imported as sawn lumber
Unprocessed Hem-Fir sawn wood under 4407.14 before lamination into panels.
If laminboard with water-resistant bonds
Waterproof glue variants report under specific 4412.95 statistical suffixes.
If cellular wood panels
If core has voids or honeycomb structure, classifies as cellular wood panels in 4418.90.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm block core dimensions >6mm x >5mm cross-section via cut samples if requested; CARB2 Phase 2 formaldehyde testing required for US import; avoid bundling with hardware to prevent set classification
Related Products under HTS 4412.59.95.00
SPF Pine Blockboard Panel
A structural blockboard panel made with core strips of spruce-pine-fir and both outer plies of coniferous pine veneer, measuring 4x8 feet by 3/4 inch thick. Classified under HTS 4412.59.95.00 as blockboard with coniferous outer plies, excluding common softwood plywood types. Ideal for interior framing and subflooring in construction.
Douglas Fir Battenboard Sheet
Battenboard consisting of narrow Douglas fir core battens with matching coniferous fir veneers on both faces, typically 1220x2440mm by 18mm. Falls under HTS 4412.59.95.00 as battenboard with coniferous outer plies, distinct from standard plywood. Used for partition walls and lightweight structural applications.
Radiata Pine Laminboard Panel
Laminboard constructed from multiple layers of Radiata pine lumber core with coniferous pine outer veneers, 18mm thick standard size. HTS 4412.59.95.00 covers this as laminboard with both outer plies coniferous, used in cabinetry and shopfitting. Differs from veneered particleboard by solid wood core strips.
Hem-Fir Mixed Battenboard
Battenboard from Hem-Fir mixed species with coniferous outer veneers, core battens spaced for strength, 25mm thickness. Under HTS 4412.59.95.00 as other battenboard with coniferous plies, per chapter notes allowing mixed woody species. Common in modular building systems.
Western Hemlock Laminboard
Laminboard panels featuring Western hemlock core laminations with coniferous hemlock outer plies, standard 19mm thickness. Classified HTS 4412.59.95.00 for other laminboard with coniferous faces, used in interior joinery. Meets subheading definition for blockboard-style construction.
Scots Pine Battenboard
European Scots pine battenboard with spaced core battens and coniferous pine veneers on both sides, 22mm thick. HTS 4412.59.95.00 for other battenboard types with coniferous plies, applied in temporary formwork and staging. Core battens provide directional strength.