Parana Pine Face Battenboard Panel for Furniture
Battenboard with narrow wood batten core, Parana pine (Araucaria angustifolia) face ply, coniferous back; suitable for table tops. HTS 4412.59.60.00 applies to this grain-exposed, non-covered laminated wood product with specified face species.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made from coniferous wood particles rather than laminated plies
Oriented strand board (OSB) or particleboard from pine particles uses heading 4410, not laminated plywood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include technical data sheets showing batten spacing and core construction for classification support
• Separate from finished furniture; bare panels only to avoid 4418 classification
• Confirm binder content if any agglomerated materials used, per Chapter 44 wood product rules
Related Products under HTS 4412.59.60.00
Parana Pine Face Plywood 4x8 Sheet 3/4 Inch
Standard plywood panel measuring 4 feet by 8 feet with 3/4 inch thickness, featuring a face ply of Parana pine (Araucaria angustifolia) and back ply of coniferous wood, not surface-covered to preserve natural grain. Classified under HTS 4412.59.60.00 as blockboard/laminboard/battenboard plywood with specified Parana pine face ply from coniferous woods. Ideal for custom cabinetry and furniture where visible wood grain is desired.
Parana Pine Plywood Cabinet Panel 1220x2440mm 18mm
Metric-sized plywood sheet (1220mm x 2440mm, 18mm thick) with Parana pine face ply for kitchen cabinet doors, preserving natural texture without surface covering. Falls under HTS 4412.59.60.00 due to coniferous outer plies and specific Parana pine (Araucaria angustifolia) face designation in laminboard-style construction.
Parana Pine Face Laminated Blockboard 1/2 Inch Thick
Blockboard construction with softwood block core, Parana pine face ply, and coniferous back ply; 1/2 inch thick for shelving applications. Meets HTS 4412.59.60.00 as 'other' blockboard/laminboard/battenboard with exposed Parana pine (Araucaria angustifolia) grain, no obscuring surface treatment.
Parana Pine Veneer Plywood Shelf Board 5/8 Inch
5/8 inch plywood shelf board with premium Parana pine face veneer ply over coniferous core, transparent coating only. Specifically classified in HTS 4412.59.60.00 for its Araucaria angustifolia face ply in uncovered or transparently finished coniferous plywood form.