Okoume Plywood Panel 18mm
18mm thick okoume plywood panel with nonconiferous okoume face and back plies, ideal for marine applications due to its rot resistance, assembled from thin wood layers glued cross-grain. Classified in HTS 4412.52.31 for 'other' plywood featuring nonconiferous outer plies, without opaque surface coverings.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If for blockboard, laminboard, or battenboard variants with nonconiferous ply
Core construction with spaced strips or battens changes subheading.
If at least one outer ply is coniferous over nonconiferous core
Mixed ply composition follows the coniferous outer ply classification rule.
If particleboard core with thin face veneers, not crossbanded plies
Particleboard base classifies differently from continuous veneer plywood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain fumigation certificates if core includes softwood to meet ISPM 15; test for moisture content under 12% to prevent warping claims; distinguish from battenboard by core strip spacing
Related Products under HTS 4412.52.31
Poplar Plywood Sheet 3/4 Inch
A 3/4-inch thick plywood panel with outer plies made from nonconiferous poplar wood, consisting of multiple thin layers of wood glued together with the grain of adjacent layers perpendicular. This product is classified under HTS 4412.52.31 as plywood (not blockboard, laminboard, or battenboard) with at least one outer ply of nonconiferous wood, not surface-covered or covered only with transparent material that preserves the wood grain visibility.
Birch Face Plywood 12mm
Standard 12mm birch-faced plywood used for cabinetry and furniture, featuring nonconiferous birch as the outer face ply over a core of cross-grained wood veneers bonded with adhesive. Falls under HTS 4412.52.31 as 'other' plywood with nonconiferous outer ply, unsurfaced or with only clear coating that shows the natural birch grain and texture.
Aspen Core Birch Plywood 15/32 Inch
15/32-inch plywood with birch outer ply over aspen core, commonly used in subflooring and sheathing, where veneers are glued with alternating grain directions. HTS 4412.52.31 applies to this 'other' plywood with nonconiferous outer ply, surfaced only transparently if at all.
Keruing Face Plywood 19mm
19mm keruing-faced plywood for formwork and shuttering, with nonconiferous keruing outer plies over crossbanded core veneers, designed for repeated use in concrete pouring. This qualifies under HTS 4412.52.31 as unsurfaced 'other' plywood with nonconiferous outer faces.
Radiata Pine Core Poplar Plywood 4x8 Sheet
Standard 4x8 foot plywood sheets with poplar nonconiferous face over radiata pine core, used in packaging and pallets, with clear grain visible through any UV coating. HTS 4412.52.31 covers this as 'other' plywood meeting the outer ply and surface requirements.
Meranti Plywood for Furniture 10mm
10mm meranti plywood panels with nonconiferous meranti outer plies, perfect for drawer bottoms and shelving, featuring natural wood texture uncoated or with clear varnish. Classified under HTS 4412.52.31 for plywood not fitting blockboard categories with specified surface treatment.