Oak Veneer Laminboard Sheet
Laminboard consisting of thin oak outer plies laminated over alternating layers of narrow hardwood strips, 1220x2440mm by 18mm thick. Classified under HTS 4412.52.31.75 for laminboard with nonconiferous outer ply (oak), grain-visible surface without opaque covering. Ideal for high-end furniture doors and tabletops.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If outer ply thickness exceeds 6mm
Thicker outer plies classify as veneered panels rather than thin-ply laminboard.
If imported as individual hardwood sheets, not laminated
Unlaminated nonconiferous wood sheets fall under veneer/plywood stock heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain species verification for oak outer plies; mixed species may require average classification
• Label panels clearly with country of origin and TSCA certification to pass CBP examination
• Avoid common pitfall of misdeclaring as 'veneered panels' (4412.94) if core structure qualifies as laminboard
Related Products under HTS 4412.52.31.75
Poplar Blockboard Plywood Panel
A structural plywood panel made from poplar wood outer plies with a blockboard core of glued wood blocks, measuring 4x8 feet by 3/4 inch thick. It falls under HTS 4412.52.31.75 as blockboard with at least one outer ply of nonconiferous wood (poplar), not surface-covered in a way that obscures the grain. Used primarily for furniture framing and cabinetry construction.
Birch Battenboard Construction Plywood
Battenboard plywood with birch outer plies over narrow wood batten core strips, 18mm thick standard sheathing size. Meets HTS 4412.52.31.75 as battenboard with nonconiferous (birch) outer ply, transparent surface coating only. Commonly used for subflooring and wall paneling in construction.
Aspen Laminboard Furniture Core Panel
Lightweight laminboard panels with aspen hardwood outer plies over stripwood core, 15mm thickness. Classified HTS 4412.52.31.75 for nonconiferous aspen face, no obscuring surface treatment. Perfect for ready-to-assemble furniture carcasses.
Beech Battenboard Shelving Plywood
Structural battenboard with European beech outer plies, 20mm thick for heavy-duty shelving. HTS 4412.52.31.75 due to nonconiferous beech face ply and transparent oil finish showing grain. Widely used in retail fixture manufacturing.
Maple Blockboard Tabletop Plywood
Blockboard panels featuring select maple outer plies with finger-jointed block core, 25mm x 5x10 ft. Falls under HTS 4412.52.31.75 as nonconiferous maple-faced blockboard with clear lacquer surface. Used for restaurant tabletops and conference surfaces.
Mahogany Face Blockboard Cabinet Plywood
Premium blockboard with mahogany nonconiferous outer plies and softwood block core, 12mm x 4x8 ft sheets. HTS 4412.52.31.75 applies due to mahogany face ply and clear UV-protective coating that preserves wood grain visibility. Used for custom kitchen cabinets and millwork.