Meranti Tropical Plywood Sheet 18mm 1220x2440mm
Standard metric-sized plywood (1220x2440mm, 18mm thick) with Meranti tropical wood outer ply, constructed as laminboard with cross-banded core veneers. No opaque surface covering, preserving the natural tropical grain texture, fitting HTS 4412.51.31.75 for other uncovered tropical plywood. Ideal for interior joinery and boat building.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If outer ply is temperate hardwood like oak
Non-tropical hardwood outer plies classify under 4412.32, excluding tropical wood designation.
If core uses medium density fiberboard instead of veneer
Plywood with fiberboard core falls under 4411.14 for density fiberboard-faced panels.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill certificates confirming tropical outer ply and low binder content; check Lacey Act declarations for wood origin
• Avoid moisture damage during shipping with proper packaging
• Confirm not exceeding formaldehyde limits per CARB Phase 2
Related Products under HTS 4412.51.31.75
Tropical Okoume Plywood Panel 4x8 ft 3/4 inch
A 4x8 foot plywood sheet with 3/4 inch thickness featuring Okoume tropical hardwood as at least one outer ply, made from thin layers of wood veneer glued together. This panel is not surface-covered or only has transparent coating that reveals the grain, classifying it under HTS 4412.51.31.75 as blockboard/laminboard/battenboard style plywood with tropical outer ply. Commonly used for cabinetry and furniture where natural wood appearance is desired.
Keruing Tropical Blockboard 12mm 4x8 ft
Blockboard panel (4x8 ft, 12mm thick) with Keruing tropical hardwood outer face ply over softwood strip core, surface untreated or with clear varnish only. Meets HTS 4412.51.31.75 as other plywood-type with tropical outer ply not obscuring grain. Used for lightweight furniture and partitioning.
Sapele Plywood Laminboard 15mm Metric Size
15mm thick laminboard plywood with Sapele tropical mahogany outer veneer ply, cross-laminated with poplar core, clear-coated to show grain patterns. Classified in HTS 4412.51.31.75 for other uncovered tropical plywood variants. Popular for high-end cabinet doors and decorative panels.
Dark Red Meranti Battenboard Panel 19mm
19mm battenboard with Dark Red Meranti tropical outer ply over battened core strips, unfinished surface or UV clear coat preserving markings. Fits HTS 4412.51.31.75 as other tropical plywood not surface-covered obscurely. Suited for structural shop fitting and shelving.
Balau Tropical Plywood Sheet 3/4 inch CDX Grade
CDX grade 3/4 inch plywood with Balau tropical hardwood outer ply, suitable for exterior sheathing but imported uncovered to show grain. Classifies under HTS 4412.51.31.75 for other tropical plywood without obscuring surfaces. Used in construction formwork and subflooring.
Kapur Laminboard Plywood 10mm 4x8
Thin 10mm Kapur tropical wood faced laminboard plywood (4x8 sheets) with natural finish highlighting texture. HTS 4412.51.31.75 applies to this other category of uncovered tropical outer ply plywood. Applied in model making and lightweight displays.