Radiata Pine Cabinet Plywood
Thin plywood panels of Radiata pine veneers (each ≤6mm), coniferous outer plies, for kitchen cabinets. Classifies in HTS 4412.39.5050 as other non-bamboo plywood not for boxes or aircraft. Smooth surface ideal for painting and finishing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cut and edged for specific furniture use
Worked plywood components for furniture shift to Chapter 44 joinery headings.
If structural grade with thicker face veneers
≥6mm outer plies move to structural plywood subcategories.
If imported as sawn Hem-fir boards, not laminated
Pre-plywood sawn lumber from mixed hemlock-fir classifies under coniferous sawn wood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Size panels post-import if needed; pre-cut for cabinets risks 4418 classification
• Verify pine species via ISPM 15 if palletized; fumigation certificates required
Related Products under HTS 4412.39.50.50
5mm Spruce Plywood Panel
A 5mm thick plywood panel made from multiple layers of spruce wood sheets, each ply not exceeding 6mm, with both outer plies being coniferous spruce. Classified under HTS 4412.39.5050 as other plywood consisting solely of wood sheets (non-bamboo) with coniferous outer plies, not specified elsewhere. Ideal for lightweight construction and furniture making.
Douglas Fir Marine Plywood Sheet
Marine-grade plywood sheet constructed from Douglas fir veneers, each ply ≤6mm, with coniferous outer plies for water resistance. Falls under HTS 4412.39.5050 as other coniferous plywood not for specific uses like containers or aircraft. Used in boat building and humid environments.
Pine Laminated Utility Plywood
Utility-grade plywood from pine sheets, all plies ≤6mm thick, featuring pine coniferous outer layers for general construction. HTS 4412.39.5050 applies to this 'other' category of non-bamboo wood plywood with coniferous faces. Suitable for shelving and subflooring.
S-P-F Mixed Conifer Plywood
Plywood from Spruce-Pine-Fir (S-P-F) mixed coniferous sheets per subheading note, each ply ≤6mm, outer plies coniferous. HTS 4412.39.5050 for other such plywood; species proportion varies as sourced from mixed stands. Common in framing and cabinetry.
Lodgepole Pine Sheathing Plywood
Sheathing plywood from lodgepole pine sheets ≤6mm ply thickness, coniferous faces for wall and roof underlayment. HTS 4412.39.5050 covers this other category plywood. Engineered for exposure rating in construction.
Ponderosa Pine Underlayment Plywood
Ponderosa pine plywood for floor underlayment, plies ≤6mm thick, coniferous faces ensuring stability. Under HTS 4412.39.5050 as other category; sanded surface for smooth overlay. Meets building code for subflooring.