Agathis Face Rough Plywood for Cabinets
Rough or touch-sanded plywood panels with Agathis spp. outer ply for cabinetry bases, each coniferous ply ≤6mm thick, no obscuring surface cover. Precisely matches HTS 4412.39.40.51 criteria for minimal processing and specific wood species. Requires on-site finishing for furniture applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If blockboard or laminboard construction
Uses solid wood blocks between plies rather than sheet wood throughout, different plywood type.
If veneer sheets only, not laminated
Single Agathis ply sheets ≤6mm without lamination classify as coniferous veneer.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Label formaldehyde emission class (CARB Phase 2) on entry documents; verify touch-sanding equipment logs if audited; prevent reclassification by avoiding pre-cut component shipments
Related Products under HTS 4412.39.40.51
Agathis Plywood Construction Panels
Rough touch-sanded plywood panels made with at least one outer ply of Agathis spp. coniferous wood, each ply not exceeding 6mm thick, used in structural building applications. Classified under HTS 4412.39.40.51 due to minimal processing (rough or touch sanded only) and specific Agathis outer ply requirement, with no surface covering obscuring the wood grain. Ideal for framing and subflooring where further finishing occurs on-site.
Touch-Sanded Agathis Subfloor Plywood
Plywood sheets with Agathis spp. face ply, touch sanded solely for thickness control, consisting of coniferous wood sheets ≤6mm per ply, not further manufactured. Meets HTS 4412.39.40.51 as rough/ touch-sanded product with transparent or no surface covering, preserving natural grain visibility. Commonly used under flooring in residential construction.
Rough Agathis Plywood Sheathing
Exterior-grade rough plywood sheathing featuring at least one Agathis outer ply, coniferous sheets each ≤6mm, minimally touch sanded for sizing without further processing. Falls under HTS 4412.39.40.51 for its specific rough state and grain-exposing surface (clear/transparent or none). Used for wall and roof sheathing in framing.
Touch Sanded Agathis Pallet Plywood
Industrial plywood for pallet decking with Agathis outer ply, rough/touch sanded coniferous sheets ≤6mm ply thickness, grain visible. HTS 4412.39.40.51 applies due to processing limit and species specification, distinguishing from finished boards. Suited for heavy-duty shipping platforms.
Rough Agathis Plywood for Crating
Plywood sheets for custom crating, featuring Agathis face ply, touch sanded only with coniferous plies ≤6mm, no grain-obscuring cover. Classified HTS 4412.39.40.51 for exact rough processing and wood specs. Used in export packaging fabrication.
Agathis Outer Ply Rough Wall Panels
Rough touch-sanded plywood wall panels with Agathis spp. exterior ply, solely coniferous wood sheets ≤6mm each, transparent surface max. HTS 4412.39.40.51 due to minimal sizing sand and species detail. For interior partition rough-in.