Loblolly Pine Sanded Plywood Sheet
Standard 4x8 ft plywood sheet with outer plies of loblolly pine (Pinus taeda), fully sanded on one face for cabinetry applications. Consists solely of wood sheets ≤6mm thick, no opaque covering obscuring grain. Meets 4412.39.4032 as southern yellow pine type with specified sanding.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If lacks full sanding on specified face
Processing state changes classification from sanded to unsanded category
If at least one outer ply is tropical wood
Outer ply material composition shifts to different coniferous-tropical heading
If imported as pre-cut builder's joinery panels
End use as finished joinery rather than generic plywood changes heading
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Require supplier certificate specifying loblolly pine species; check for transparent coatings only; inspect for any edge profiling that constitutes further processing
Related Products under HTS 4412.39.40.32
Longleaf Pine Sanded Plywood Panel
Plywood panel made solely from sheets of wood, each ply not exceeding 6mm thick, with both outer plies of coniferous wood including longleaf pine (Pinus palustris). Fully sanded on at least one face for smooth finish but not further processed, surface not covered or covered only with transparent material that shows grain. Classified under 4412.39.4032 due to specific southern pine outer ply and sanding specification.
Slash Pine Single-Face Sanded Plywood
3/4-inch slash pine (Pinus elliottii) plywood with one face fully sanded smooth, ideal for underlayment or painting prep. Both outer plies coniferous southern pine, plies ≤6mm, grain-visible surface. Fits 4412.39.4032 exactly per sanding and species criteria.
Shortleaf Pine Sanded Structural Plywood
Structural-rated shortleaf pine (Pinus echinata) plywood panel, one face sanded for finish work, multiple thin plies ≤6mm. Outer plies qualify as specified Virginia/southern pines, no grain-obscuring treatments. Classified 4412.39.4032 for sanding and species match.
Pitch Pine Sanded Veneered Plywood
Pitch pine (Pinus rigida) veneered plywood with sanded face ply showing natural markings, all wood sheets ≤6mm thick. Both faces coniferous southern pine types, transparent surface only. 4412.39.4032 due to precise species and processing level.
Virginia Pine Sanded Cabinet Plywood
Virginia pine (Pinus virginiana) plywood for cabinet backs, fully sanded one face, plies ≤6mm coniferous southern pine. Grain texture visible through clear coating if applied. Meets all 4412.39.4032 criteria for species, sanding, no further work.
Mixed Southern Pine Sanded Plywood
Plywood combining longleaf and slash pine outer plies, one face fully sanded smooth. All plies wood ≤6mm, coniferous southern species per 4412.39.4032 specs, no obscuring surface treatments.