Douglas Fir Touch-Sanded Sheathing Plywood
Structural sheathing plywood featuring Douglas fir on at least one outer face, layered from thin wood sheets (each ≤6mm), both outer plies coniferous, touch sanded solely for dimension control. No additional finishing, painting, or covering that hides the natural wood grain, matching HTS 4412.39.40.11 criteria precisely.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If without Douglas fir outer ply but other coniferous
Douglas fir-specific subheading excludes other conifers, which classify under the basket provision 4412.39.4019.
If surface-covered with opaque laminate or veneer
Surface-covered plywood shifts to heading 4418 if covering obscures grain, regardless of base wood type.
If individual plies sold separately, not laminated
Unlaminated wood plies or particleboard classify under 4410, not plywood heading 4412.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include photos and measurements proving touch sanding is minimal for sizing only, preventing misclassification as further manufactured
• Ensure Customs declaration specifies 'rough or touch sanded for sizing' and references Douglas fir botanical name for accurate duty assessment
• Check for formaldehyde emission compliance (EPA TSCA Title VI) with test reports, as required for composite wood panels
Related Products under HTS 4412.39.40.11
Douglas Fir Rough Plywood Panel 4x8 ft
A 4x8 foot plywood sheet made with at least one outer ply of Douglas fir (Pseudotsuga menziesii), consisting solely of wood sheets each not exceeding 6mm thick, with both outer plies of coniferous wood. It is rough or touch sanded only for sizing purposes, not further processed, and not surface-covered in a way that obscures the grain. This falls under HTS 4412.39.40.11 due to its specific Douglas fir outer ply and minimal processing.
Douglas Fir Exterior Rough Plywood Siding
Rough plywood panels designed for exterior siding, with Douglas fir (Pseudotsuga menziesii) as at least one outer ply, made from coniferous sheets ≤6mm per ply, minimally touch sanded for sizing. Lacks any grain-obscuring surface treatment, fitting HTS 4412.39.40.11 for non-further-processed coniferous plywood.
Douglas Fir Structural Rough Plywood 3/4 Inch
3/4-inch thick structural plywood with Douglas fir outer ply, constructed from multiple coniferous wood sheets each ≤6mm, both faces coniferous, supplied rough or touch sanded for sizing without further refinement. Meets exact HTS 4412.39.40.11 specs for minimally processed Douglas fir plywood.
Douglas Fir Underlayment Rough Plywood Sheets
Plywood sheets for flooring underlayment with at least one Douglas fir outer ply, solely wood sheets ≤6mm thick, coniferous outer plies, touch sanded for sizing purposes only and free of obscuring coverings. Precisely classified under HTS 4412.39.40.11 for its material and processing.
Douglas Fir CDX Rough Plywood for Framing
CDX-grade plywood with Douglas fir exposure (one outer ply), made exclusively from ≤6mm coniferous wood sheets, both outer plies coniferous, rough or touch sanded solely for sizing without grain-obscuring treatments. Fits HTS 4412.39.40.11 as specified Douglas fir plywood.