Birch Face Plywood Sheet 3.5mm x 1.0m x 1.8m
Laminated birch plywood panel with nonconiferous face ply, dimensions 3.5mm thickness, 1.0m width, 1.8m length, all plies ≤6mm wood sheets. Classified under HTS 4412.34.32.65 for small-format thin panels not surface-covered or with transparent finish preserving wood grain. Ideal for decorative shelving and model making.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If both outer plies are coniferous like spruce or pine
Coniferous outer plies classify under 4412.3 regardless of inner ply composition
If supplied as layered veneer sheets not laminated into plywood panels
Unlaminated wood sheets classify as veneer under heading 4408
If dimensions exceed limits (e.g., >1.2m width)
Larger format plywood falls under 4412.34 other size categories
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document wood species origin with fumigation certificates; birch requires phytosanitary compliance under international wood regulations
• Ensure no binders exceed allowed limits—pure wood plies only; inspect for delamination which could trigger quality disputes
• For EU/North American imports, pre-check CITES compliance if any ply approaches restricted species thresholds
Related Products under HTS 4412.34.32.65
Poplar Plywood Panel 3.2mm x 1.1m x 2.0m
Thin poplar plywood panel with nonconiferous outer ply, measuring 3.2mm thick, 1.1m wide, and 2.0m long, consisting solely of wood sheets each not exceeding 6mm thickness. It falls under HTS 4412.34.32.65 as it meets the dimensional limits and has no obscuring surface covering. Used for cabinet backs and furniture components.
Alder Wood Plywood Panel 2.8mm x 0.9m x 2.1m
Ultra-thin alder plywood for fine furniture, 2.8mm thick, 0.9m wide, 2.1m long, with nonconiferous outer ply and all wood sheets ≤6mm. Meets HTS 4412.34.32.65 specifications for compact panels with natural or transparent surface finish. Commonly used in drawer bottoms and lightweight partitions.
Oak Veneer Plywood Small Panel 3.0mm x 1.15m x 1.95m
Small-format oak-faced plywood panel exactly fitting HTS 4412.34.32.65 dimensional constraints: 3.0mm x 1.15m x 1.95m, nonconiferous outer ply, all wood plies ≤6mm thick. Natural grain finish preserved through transparent coating or bare surface. Perfect for craft projects and miniature furniture.
Maple Hardwood Plywood Panel 3.6mm x 1.2m x 2.2m
Maximum dimension maple plywood panel precisely at HTS 4412.34.32.65 limits: 3.6mm thick, 1.2m wide, 2.2m long, nonconiferous face ply, all sheets ≤6mm wood. Clear finish preserves authentic maple grain texture. Used in musical instrument backs and high-end cabinetry.