Oak Outer Ply Hardwood Plywood Sheet
Plywood panel consisting solely of wood sheets, each ply not exceeding 6mm thick, with at least one outer ply of oak (Quercus spp.), a specified nonconiferous hardwood. Classified under HTS 4412.33.57.00 as other plywood meeting the species and thickness criteria, excluding bamboo.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If outer ply is coniferous wood like pine
Coniferous outer plies shift classification to 4412.39, as subheading 4412.33 requires specified nonconiferous species.
If any ply exceeds 6mm thickness
Plywood with plies >6mm falls under 4412.10, regardless of outer ply species.
If assembled into finished cabinet doors
Assembled cellular wood panels or finished articles like cabinet doors classify under 4418.40 as manufactured goods.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify outer ply species documentation (e.g
• oak certification) as CBP requires proof of nonconiferous hardwood listed in subheading
• Measure all plies to confirm none exceed 6mm; mismeasurement leads to reclassification under other plywood headings
• Include mill test certificates showing no bamboo content to avoid disputes under chapter notes
Related Products under HTS 4412.33.57.00
Birch Face Hardwood Plywood Panel
Laminated plywood sheet with birch (Betula spp.) as the outer face ply, all wood plies ≤6mm, no bamboo. Fits HTS 4412.33.57.00 as 'other' plywood with specified nonconiferous outer ply species.
Maple Veneer Core Plywood
Plywood with maple (Acer spp.) outer veneer ply over core sheets, all ≤6mm thick, solely wood construction. HTS 4412.33.57.00 applies to this 'other' category plywood with qualifying nonconiferous outer species.
Walnut Faced Cabinet Plywood
High-grade plywood panel with walnut (Juglans spp.) face ply for cabinetry, all wood plies ≤6mm, no binders exceeding norms. Classifies in HTS 4412.33.57.00 as other plywood with listed nonconiferous outer wood.
Beech Outer Ply Structural Plywood
Structural-grade plywood with beech (Fagus spp.) outer plies, consisting of wood sheets ≤6mm thick. Meets HTS 4412.33.57.00 for other plywood featuring specified nonconiferous hardwood outer layer.
Poplar Aspen Mix Plywood Panel
Plywood made with poplar and aspen (Populus spp.) outer plies, all sheets ≤6mm, solely wood. HTS 4412.33.57.00 'other' category for qualifying nonconiferous species plywood.
Ash Wood Outer Plywood Sheet
Plywood sheets featuring ash (Fraxinus spp.) as outer ply, wood plies not exceeding 6mm thickness. Precisely matches HTS 4412.33.57.00 for other such laminated wood panels.