Beech Plywood Cabinet Panel
Cabinet-grade plywood with beech (Fagus spp.) face ply, maple core layers all ≤6mm thick. Clear lacquer surface maintains visibility of beech texture and markings. Under 4412.33.32 for other qualifying hardwood-faced plywood sheets.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If blockboard construction with solid core blocks
Blockboard uses solid wood blocks between plies, classifying separately from sheet-only plywood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Comply with CARB Phase 2 formaldehyde limits; test reports prevent CBP holds
• Mark 'made from sheets of wood' to distinguish from particleboard mimics
• Edge banding if present must be noted; may affect set classification
Related Products under HTS 4412.33.32
Alder Face Birch Plywood Panel
Plywood panel consisting solely of wood sheets, each ply not exceeding 6mm thick, with at least one outer ply of alder (Alnus spp.) nonconiferous wood and inner plies of birch. Not surface-covered or covered only with transparent material that preserves grain visibility. Classified under 4412.33.32 as other plywood meeting the specified species and construction criteria.
Oak Veneer Core Plywood Sheet
Laminated plywood sheet with outer face ply of oak (Quercus spp.) nonconiferous wood, core of mixed poplar plies, all ≤6mm thick. Surface is clear-coated to highlight natural oak grain and texture. Falls under 4412.33.32 for other plywood with specified hardwood outer ply, not obscuring face characteristics.
Maple Faced Poplar Plywood
High-quality plywood with maple (Acer spp.) outer ply over poplar core sheets, each ply max 6mm, used for cabinetry. No surface covering or only transparent varnish preserving maple's figure. Meets 4412.33.32 as other plywood with listed nonconiferous species outer face.
Birch Outer Ply Utility Plywood
Utility-grade plywood panel featuring birch (Betula spp.) face ply with alder inner plies, all ≤6mm thick, for shelving. Uncovered surface showcases natural wood markings. Classified in 4412.33.32 for other plywood with qualifying nonconiferous outer species.
Walnut Face Mixed Hardwood Plywood
Premium plywood with walnut (Juglans spp.) outer veneer ply over mixed beech/poplar cores, each sheet ≤6mm. Transparent oil finish highlights grain without obscuring texture. Fits 4412.33.32 as other plywood specifying walnut among eligible nonconiferous woods.
Ash Wood Plywood Sheet
Plywood constructed from ash (Fraxinus spp.) outer ply and poplar interiors, every ply ≤6mm, for furniture framing. Unsurface-covered to expose natural ash grain. Meets criteria of 4412.33.32 other plywood with listed nonconiferous species.