Oak Plywood Wood Flooring Panels
These plywood panels are designed specifically for wood flooring applications, consisting solely of wood sheets each not exceeding 6mm thick, with at least one outer ply of oak (Quercus spp.), a nonconiferous hardwood. The surface is not covered or has a clear transparent coating that preserves the natural grain, texture, and markings of the oak face ply, classifying it under HTS 4412.33.32.25 as wood flooring plywood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If used for flooring but surface-covered with opaque paint or vinyl
Surface-covered plywood with obscuring materials shifts to a different subheading under 4412.33.26, regardless of wood flooring intent.
If pre-finished and ready for immediate retail installation as complete flooring
Fully assembled or machined parquet/wood flooring for retail sale falls under Chapter 44 heading 4418, not plywood panels.
If outer plies are coniferous woods like pine or spruce
Plywood with coniferous outer plies changes the heading to 4412.29, as this code requires specified nonconiferous hardwoods.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify each ply thickness does not exceed 6mm and confirm at least one outer ply is from specified nonconiferous woods like oak via mill certificates
• Document that any surface covering is clear/transparent and does not obscure grain; provide lab tests if challenged by Customs
• Avoid misclassification as finished flooring (4418.30) by ensuring panels require on-site installation and finishing
Related Products under HTS 4412.33.32.25
Maple Plywood Engineered Wood Flooring
Engineered flooring made from plywood with multiple wood sheets ≤6mm thick, featuring an outer ply of maple (Acer spp.) nonconiferous wood. The natural maple grain is visible through optional clear UV coating, qualifying as 'wood flooring' under HTS 4412.33.32.25 for plywood panels intended for floor installation.
Birch Plywood Hardwood Flooring Sheets
Laminated plywood sheets for hardwood flooring, made from wood plies ≤6mm each, with birch (Betula spp.) as the outer nonconiferous ply. Unsurface-covered to showcase birch's natural texture and markings, precisely matching HTS 4412.33.32.25 for wood flooring plywood.
Walnut Veneer Plywood Flooring Panels
Plywood flooring panels with thin walnut (Juglans spp.) nonconiferous wood outer ply over core sheets, all ≤6mm thick. Clear lacquer surface protection maintains walnut's veining and figure, fitting HTS 4412.33.32.25 criteria for uncovered or transparently coated wood flooring plywood.
Ash Plywood Wood Flooring Boards
Multi-ply wood flooring boards from sheets ≤6mm thick, outer ply of ash (Fraxinus spp.) nonconiferous wood. Natural surface or clear oil finish reveals ash's characteristic grain, designated as wood flooring under HTS 4412.33.32.25.
Beech Plywood Laminate Flooring Core
Plywood core sheets for laminate flooring systems, composed of ≤6mm wood plies with beech (Fagus spp.) outer nonconiferous face. Transparent protective layer preserves beech texture for visible grain in final flooring, under HTS 4412.33.32.25 as wood flooring.