Birch Veneer Cabinet Plywood Panel 18mm
High-quality plywood panel designed for kitchen cabinets, featuring a birch face ply from Betula spp., with multiple thin nonconiferous plies totaling 18mm thickness, uncovered surface. Meets HTS 4412.33.0640 as it has a specified nonconiferous birch outer ply, no surface covering obscuring the wood's texture. Ideal for custom furniture showing natural birch grain.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If face ply is oak (Quercus spp.) instead
Different nonconiferous species for the outer ply changes the specific statistical reporting code within the same heading.
If assembled into finished cabinet doors
Completed furniture components like doors are classified as builders' joinery rather than raw plywood panels.
If imported as thin birch veneer sheets only (<6mm single ply)
Single thin sheets of birch wood are veneer, not laminated plywood with multiple plies.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include mill certificates specifying birch species and ply count/thickness to prevent disputes over 'other' vs. specified face ply categories
• Avoid common pitfall of importing pre-sanded panels mistaken for surface-covered; document raw state at export
• Check for formaldehyde emission compliance (EPA TSCA Title VI) with test reports required for composite wood products
Related Products under HTS 4412.33.06.40
Birch Face Plywood Sheet 4x8 Feet 3/4 Inch
A standard 4x8 foot plywood panel with a birch (Betula spp.) face ply and inner plies of mixed nonconiferous wood, each not exceeding 6mm thick, not surface covered. Classified under HTS 4412.33.0640 because it features at least one outer ply of birch, a specified nonconiferous species, with no opaque surface covering that obscures the natural grain. Commonly used for cabinetry and furniture where the birch veneer provides aesthetic appeal.
Furniture Grade Birch Plywood 12mm 2440x1220mm
Metric-sized plywood sheet (2440x1220mm, 12mm thick) with birch (Betula spp.) face and back plies, inner nonconiferous layers each ≤6mm, not surface covered. Falls under HTS 4412.33.0640 due to birch outer ply specification and lack of opaque covering, preserving natural markings. Used in high-end furniture manufacturing.
Birch Plywood for Speaker Cabinets 15mm
15mm thick plywood with birch face ply (Betula spp.), designed for audio enclosure construction, all plies nonconiferous ≤6mm, not surface covered. HTS 4412.33.0640 applies due to specific birch outer ply and clear/uncovered finish showing wood markings. Provides resonant properties for professional sound systems.
Raw Birch Faced Laminated Wood Panel 5/8 Inch
Laminated plywood panel 5/8 inch thick with birch (Betula spp.) outer ply, similar construction to veneered panels, all thin nonconiferous plies, no surface covering. Fits HTS 4412.33.0640 precisely for its birch face and uncovered state preserving texture. Used in interior paneling and shelving.
Unfinished Birch Outer Ply Plywood 3/4 Baltic
3/4 inch Baltic-style plywood with birch outer ply (Betula spp.), high ply count all nonconiferous ≤6mm, raw surface not covered. Perfect match for HTS 4412.33.0640 with its specified species and clear grain visibility. Suited for prototypes and custom builds.
Baltic Birch Plywood 1/2 Inch Utility Panel
Baltic birch plywood panel (1/2 inch thick) sourced from Betula spp., multi-ply construction with all nonconiferous thin plies, raw unfinished surface. Classified in HTS 4412.33.0640 for its birch face ply and absence of surface covering that hides grain texture. Popular for jigs, fixtures, and millwork.