Tropical Meranti Plywood Panel 4x8 ft
Standard 3/4-inch plywood panel made from multiple thin sheets of tropical meranti wood, with at least one outer ply of meranti. Each ply is under 6mm thick, and the panel is not surface-covered or only has transparent coating that reveals the wood grain. Classified under 4412.31.52.75 as other plywood with tropical wood outer ply, not further worked.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If outer plies are non-tropical hardwoods like oak or maple
Plywood with non-tropical outer plies shifts to other hardwood category excluding tropical species.
If structurally graded for load-bearing applications
Load-bearing plywood receives different statistical suffix even with tropical plies.
If edge-banded or prefinished for cabinetry
Additional working like edge banding moves it from plywood to builders' joinery category.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify CITES documentation for tropical species like meranti to comply with endangered species regulations
• Provide mill certificates confirming ply thickness under 6mm and tropical outer ply composition
• Avoid misclassification by ensuring no opaque surface coverings that obscure grain patterns
Related Products under HTS 4412.31.52.75
Dark Red Meranti Marine Plywood Sheet
Water-resistant plywood sheets constructed from thin tropical dark red meranti veneers, each ply ≤6mm, with tropical outer faces exposed or under clear sealant. Used for boat building and humid environments, fitting 4412.31.52.75 as unsurfaced tropical plywood panels.
Keruing Tropical Hardwood Plywood 1/2-inch
Medium-density plywood panel with keruing (Dipterocarpus) tropical wood outer plies, all veneers ≤6mm thickness, raw or with clear UV-protectant coating. Suitable for furniture and interior paneling under HTS 4412.31.52.75 for other tropical plywood.
Balau Tropical Plywood for Flooring Underlayment
Balau-faced plywood sheets with all plies ≤6mm, tropical outer veneer visible through transparent finish, designed as subflooring material. Falls under 4412.31.52.75 as other uncovered tropical plywood.
Kapur Mixed Tropical Plywood 5/8-inch Panel
5/8-inch plywood with kapur tropical hardwood outer plies over mixed wood core, each layer ≤6mm, raw surfaced or clear-coated. Used in shelving and partitioning, classified 4412.31.52.75.
Tali Tropical Hardwood Plywood for Cabinet Backs
Thin tali (tropical) plywood panels for cabinetry backs, all plies <6mm with exposed tropical face ply or clear film. Meets 4412.31.52.75 for other tropical plywood not surface-covered.
Kempas Tropical Plywood Shelving Board
Kempas tropical outer ply plywood boards ≤6mm per layer, suitable for shelving with natural grain visible. Classifies under 4412.31.52.75 as other tropical plywood panels.