Birch-Faced Okoume Tropical Plywood 3/4 Inch
3/4-inch thick plywood with multiple wood sheets each ≤6mm, birch (Betula spp.) face ply, and Okoume tropical wood outer ply, featuring no covering or only grain-preserving transparent finish. Fits HTS 4412.31.06.60 as 'other' plywood with specified tropical and birch plies.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If face ply is dark red meranti or white lauan
Specific tropical face plies have dedicated subheadings, pulling from the general birch 'other' category.
If density exceeds 0.5 g/cm³
Medium density fiberboard (MDF) classification applies if agglomerated and dense, not qualifying as sheet plywood.
If surface-covered with opaque decorative finish
Any non-transparent surface covering shifts to 4412.94 blockboard or laminboard provisions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include CITES documentation if tropical species like Okoume trigger endangered wood restrictions under US import rules
• Label clearly as 'not surface-covered' or specify transparent coating type; mismatches lead to duty disputes
• Test for formaldehyde emissions if destined for interior use—comply with TSCA Title VI even pre-import
Related Products under HTS 4412.31.06.60
Birch Face Tropical Plywood Panel 4x8 Feet
A 4x8 foot plywood panel consisting solely of wood sheets, each ply not exceeding 6mm thick, with at least one outer ply of tropical wood and a face ply of birch (Betula spp.). It is not surface-covered or covered only with transparent material that preserves the grain, texture, and markings of the birch face ply. This falls under HTS 4412.31.06.60 as 'other' plywood meeting these specific ply and wood type criteria.
Custom Birch Tropical Veneer Plywood Sheet
Custom-sized plywood sheets made from wood plies ≤6mm thick, featuring a birch (Betula spp.) face ply and tropical wood outer ply, unsurface-covered or with clear transparent coating. Classified under HTS 4412.31.06.60 as 'other' in the birch face tropical plywood category due to exact material and surface specs.
Furniture Grade Birch Tropical Core Plywood
High-quality plywood for furniture, with birch face ply (Betula spp.), tropical core plies all ≤6mm thick, and no obscuring surface treatment. Meets precise HTS 4412.31.06.60 criteria for 'other' tropical outer ply birch-faced plywood.
Birch Top Layer Sapele Tropical Plywood Cut-to-Size
Cut-to-size plywood panels with ≤6mm wood plies, featuring birch (Betula spp.) top/face ply and Sapele tropical wood outer ply, preserved natural grain via clear coating only. Directly classified in HTS 4412.31.06.60 'other' subcategory.