Low-Density Pine Wood Fiberboard Panel
A lightweight fiberboard panel made from pine wood fibers bonded with resins, with a density not exceeding 0.5 g/cm³. Classified under HTS 4411.94.0080 as 'other' low-density fiberboard excluding medium board or laundry boards. Used primarily for interior construction and furniture cores where weight reduction is key.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If density exceeds 0.5 g/cm³ up to 0.8 g/cm³
Medium density fiberboard (MDF) shifts to 4411.12 based on density threshold in heading 4411.
If unprocessed wood particles or simple agglomerates
Raw wood waste like sawdust or chips before full fiberboard processing falls under fuel/particle headings.
If laminated or surface-covered for builders' joinery
Surface-worked or assembled panels for specific joinery use move to Chapter 44 heading 4418.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain mill test certificate confirming density ≤0.5 g/cm³ and wood fiber content to meet Chapter 44 definitions
• Ensure documentation distinguishes from higher-density MDF (4411.12+) or laundry boards (4411.94.0095)
• Check for formaldehyde emission compliance under TSCA Title VI for US market entry
Related Products under HTS 4411.94.00.80
Bamboo Fiberboard Insulation Board
Low-density fiberboard produced from bamboo fibers (a woody material per Chapter 44 note), density ≤0.5 g/cm³, bonded with minimal resins. Falls under HTS 4411.94.0080 as 'other' low-density fiberboard. Ideal for acoustic and thermal insulation in walls and ceilings.
Recycled Wood Shavings Low-Density Fiberboard
Fiberboard manufactured from recycled wood shavings and sawdust, agglomerated at low density ≤0.5 g/cm³ with resins. HTS 4411.94.0080 covers this as 'other' low-density non-medium, non-laundry board. Commonly used for packaging inserts and lightweight cores.
Acoustic Low-Density Wood Fiber Panel
Specialty low-density (≤0.5 g/cm³) fiberboard designed for sound absorption, made from softwood fibers without surface coating. Classifies in HTS 4411.94.0080 as other low-density fiberboard. Used in recording studios, theaters, and office partitions.
Softwood Underlayment Fiberboard Sheet
Low-density fiberboard sheets (≤0.5 g/cm³) from spruce-pine-fir (S-P-F) fibers for flooring underlayment. HTS 4411.94.0080 as other low-density, per Chapter 44 S-P-F note applicability. Provides cushioning under hardwood or laminate flooring.
Ligneous Bark Fiber Low-Density Board
Experimental low-density (≤0.5 g/cm³) fiberboard from tree bark fibers, qualifying as ligneous material per Chapter 44 note. HTS 4411.94.0080 for other low-density fiberboard. Used in sustainable packaging and non-structural panels.
Hem-Fir Low-Density Fiberboard Core
Density ≤0.5 g/cm³ fiberboard cores from Hem-Fir mixed stands (per 4407.14 note), for laminated panel production. HTS 4411.94.0080 as other low-density. Provides lightweight base for decorative overlays.