Sound-Absorbing Studio Wall Panels
Fiberboard panels engineered with density 0.35-0.5 g/cm³ and textured surfaces for recording studio walls. HTS 4411.94.00.40 as low-density other fiberboard. Fabric covering optional but panels ship as raw material.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pre-covered with decorative fabric
Surface coverings make them 'other multilayer wood products'.
If primarily polyurethane foam construction
Plastic cellular material dominates over minor wood fiber content.
If glass fiber reinforced composition
Fiberglass boards classify as glass articles, not wood fiberboard.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include NRC (Noise Reduction Coefficient) test results supporting fiberboard classification
• Ship without fabric covers to maintain raw material status vs finished wall covering
Related Products under HTS 4411.94.00.40
Wood Fiber Acoustic Ceiling Tiles
Perforated fiberboard panels (0.35-0.5 g/cm³ density) designed for sound absorption in suspended ceilings, made from agglomerated wood fibers. Classified under HTS 4411.94.00.40 as low-density 'other' fiberboard. Perforations and fissures enhance acoustic properties for office/commercial use.
Bagasse Fiberboard Wall Sheathing
Fiberboard made from sugarcane bagasse (ligneous agricultural residue), density 0.35-0.5 g/cm³ for exterior wall sheathing. HTS 4411.94.00.40 includes non-wood ligneous materials as other low-density fiberboard. Eco-friendly structural sheathing board.
Low-Density Particleboard Insulation Panels
These fiberboard panels, made from wood particles bonded with resins, have a density between 0.35 and 0.5 g/cm³, classifying them under HTS 4411.94.00.40 as low-density fiberboard other than medium board. They are commonly used for wall insulation and soundproofing in construction. The specific density range distinguishes them from higher-density MDF or HDF products.
Medium Density Fiberboard Underlayment Sheets
MDF sheets with density 0.35-0.5 g/cm³ used as flooring underlayment, produced by bonding wood fibers with resins under heat and pressure. Falls under HTS 4411.94.00.40 as low-density fiberboard 'other' category. Ideal for subflooring due to uniform structure and moisture resistance.
Low-Density MDF Speaker Baffle Boards
Specialty fiberboard cut for loudspeaker enclosures, density 0.35-0.5 g/cm³ to optimize internal damping. HTS 4411.94.00.40 covers this as 'other' low-density fiberboard. Provides resonance control superior to solid lumber.
Ligneous Bamboo Fiberboard Insulation
Fiberboard produced from bamboo (ligneous material per Chapter 44 note), density 0.35-0.5 g/cm³ for thermal insulation applications. HTS 4411.94.00.40 includes bamboo-based products as 'other' low-density fiberboard. Sustainable alternative to wood particleboard.