Medium Density Fiberboard (MDF) Panel 3/4 Inch
A standard 3/4 inch thick medium density fiberboard panel made from wood fibers bonded with resins, with a density between 0.5 and 0.8 g/cm³. Used for cabinetry, furniture, and millwork. Classifies under 4411.93.90.90 as fiberboard of wood, density 0.5-0.8 g/cm³, not specifically provided for elsewhere.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If density below 0.5 g/cm³
Lower density fiberboard falls under subheading 4411.92 for medium board.
If density exceeds 0.8 g/cm³
High-density fiberboard (>0.8 g/cm³) classifies under 4411.94.
If made from wood chips rather than fibers
Particleboard from chips uses heading 4410, not fiberboard heading 4411.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify density certification (0.5-0.8 g/cm³) with lab tests to confirm classification
• Include mill test reports showing wood fiber content and resin binders under 3% if applicable
• Avoid misclassification as particleboard (4410) by documenting fiber vs chip composition
Related Products under HTS 4411.93.90.90
MDF Shelf Board 18mm Thickness
18mm thick MDF shelf board produced from lignocellulosic fibers agglomerated with synthetic resins, density 0.6 g/cm³. Ideal for shelving units and retail fixtures. Falls under 4411.93.90.90 as other medium density fiberboard not density extremes.
Underlayment MDF Sheet 6mm
6mm medium density fiberboard sheet designed for flooring underlayment, made from wood fibers with density 0.55 g/cm³. Provides soundproofing and leveling. HTS 4411.93.90.90 covers this non-specified medium density fiberboard.
MDF Moulding Blank 1x4 Inch
1x4 inch MDF moulding blank from wood fibers, density 0.7 g/cm³, ready for profiling into trim. Used in architectural millwork. Classifies 4411.93.90.90 as other medium density fiberboard.
Laundry Hamper MDF Panel Kit
Flat-pack MDF panels (density 0.65 g/cm³) for assembling laundry hampers, wood fiber construction. Ships unassembled. 4411.93.90.90 as panels, not finished furniture.
Acoustic MDF Panel 12mm
12mm MDF panels with micro-perforations for acoustic absorption, base density 0.75 g/cm³ wood fibers. Used in studios and offices. Still 4411.93.90.90 as basic fiberboard despite perforations.
MDF Core Stock for Lamination
Balancing core stock MDF sheets (19/32 inch, 0.6 g/cm³) for laminating with melamine or veneer. Provides stable substrate. HTS 4411.93.90.90 as plain medium density fiberboard.