Melamine Faced MDF Wall Panel
A medium density fiberboard (MDF) panel with a density between 0.5-0.8 g/cm³, laminated on both sides with melamine resin-impregnated paper for decorative and protective finish. It features continuous tongue-and-groove edges designed specifically for assembling interior walls in residential construction. This product falls under HTS 4411.93.20.00 due to its fiberboard composition, resin lamination, and building construction dedication.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not featuring continuous tongue, groove or rabbet edges
Without edge profiling for building assembly, it falls under general 'other' laminated fiberboards in the same density range.
If density below 0.5 g/cm³
Lower density fiberboards, even if laminated with resins and edge-profiled for construction, classify under the lighter density subheading.
If sold as pre-finished flooring rather than wall/ceiling panels
Plywood-type panels dedicated for flooring use shift to Chapter 44 heading 4412, regardless of resin bonding.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify density certification (0.5-0.8 g/cm³) and resin content documentation to confirm classification under 4411.93
• Provide evidence of tongue-groove edges and building construction intent via architectural specs or buyer contracts
• Avoid misclassification as furniture parts by excluding assembly hardware; common pitfall is undervaluing resin lamination
Related Products under HTS 4411.93.20.00
Resin-Impregnated HDF Groove Wall Board
High-density fiberboard (HDF) sheet impregnated throughout with synthetic phenolic resins, density 0.65 g/cm³, with rabbeted edges along all four sides for seamless wall paneling in commercial buildings. The resin bonding enhances moisture resistance and structural integrity for interior partitions. Classified under HTS 4411.93.20.00 for its ligneous fiberboard base, resin impregnation, edge design, and construction application.
Synthetic Resin Laminated Subfloor Underlayment Panel
Fiberboard panel (0.75 g/cm³) bonded with moisture-resistant synthetic resins and machined with rabbet grooves on edges for interlocking subfloor systems beneath vinyl or laminate flooring in building construction. Provides soundproofing and leveling base layer. HTS 4411.93.20.00 applies for its laminated fiberboard nature, density range, edge features, and construction dedication.
Moisture-Resistant T&G Shower Wall Board
Resin-impregnated HDF panel (0.68 g/cm³) with full synthetic resin bonding for wet area applications, tongue-groove-rabbet edges for bathroom shower wall linings in residential construction. Hydrophobic properties prevent mold growth. Fits HTS 4411.93.20.00 criteria perfectly.
Tongue-and-Groove Melamine Ceiling Liner Board
Laminated MDF board (0.7 g/cm³ density) fully bonded with synthetic melamine-formaldehyde resins, featuring continuous tongue-and-groove profiles on longitudinal edges for drop ceiling grid systems in office buildings. Provides smooth, durable surface for painted or printed finishes in construction projects. Meets HTS 4411.93.20.00 as resin-laminated fiberboard dedicated to ceiling construction with specified edge treatments.
Phenolic Resin Partition Wall Fiberboard
Medium density fiberboard impregnated with phenolic synthetic resins for fire-retardant properties, density 0.55 g/cm³, with grooved and tongued edges continuously along edges for modular office partition walls. Ideal for commercial interior construction requiring quick assembly. Falls under HTS 4411.93.20.00 due to fiberboard material, resin treatment, edge design, and building wall dedication.
Decorative Laminate T&G Wall Cladding Board
MDF core (0.6 g/cm³ density) with high-pressure laminate (HPL) synthetic resin surface bonded entirely, featuring tongue-and-groove edges for vertical wall cladding in hospitality buildings. Offers aesthetic wood-grain finishes with durability. Classified HTS 4411.93.20.00 as resin-laminated fiberboard with construction-specific edges.