15mm Raw MDF Panel for Cabinetry
15mm thick unsurfaced medium density fiberboard panel, oil-treated for basic protection, ideal for kitchen cabinet boxes. Classified under HTS 4411.14.60.00 for MDF >9mm, not surface-covered (oil permitted). Provides smooth machinability for interior components.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness ≤9mm
Thinner MDF panels fall under the ≤9mm subheading even if otherwise identical
If shaped or profiled for specific end use
Assembled or machined wooden builders' joinery from MDF moves to heading 4418
If of ≥0.80 g/cm³ density
High-density fiberboard (>0.8 g/cm³) classifies separately from standard MDF
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include formaldehyde emission test results (CARB Phase 2 compliant); declare exact thickness measurement
• Avoid classifying pre-sanded panels as they may qualify as surface-worked
Related Products under HTS 4411.14.60.00
12mm Medium Density Fiberboard (MDF) Sheet
A standard 12mm thick MDF panel made from wood fibers bonded with resins, not surface-covered except for possible oil treatment. It falls under HTS 4411.14.60.00 as medium density fiberboard exceeding 9mm thickness in its 'other' category without surface coverings. Commonly used for furniture carcasses and shelving.
18mm Oil-Treated MDF Board
18mm thick MDF board with light oil treatment to prevent moisture absorption during transit, not otherwise surface-covered. Meets HTS 4411.14.60.00 criteria for thick MDF without paint, laminate or veneer. Standard size for table tops and wardrobe backs.
25mm Thick Raw MDF Slab
Heavy-duty 25mm MDF slab of medium density wood fibers, untreated except minimal oil, for structural furniture applications. Falls under HTS 4411.14.60.00 as thick, unsurfaced 'other' MDF. Used in heavy shelving and speaker cabinets.
10mm Moisture-Resistant MDF Panel
10mm thick MDF engineered for higher humidity environments through oil impregnation, no surface film or coating. Precisely matches HTS 4411.14.60.00 for >9mm unsurfaced MDF. Popular for bathroom vanities and laundry cabinets.
Standard 3/4-inch (19mm) Bare MDF
19mm (nominal 3/4-inch) bare medium density fiberboard sheet for general woodworking, oil-stabilized only. HTS 4411.14.60.00 covers this common thickness in unsurfaced condition. Basis for doorskins, moldings after machining.
11mm Speaker Grade MDF
11mm thick high-quality MDF selected for acoustic properties, untreated surface with oil only. Classifies under HTS 4411.14.60.00 as standard thick MDF without coverings. Essential material for professional audio cabinet construction.