12mm Thick Raw MDF Sheet
A standard medium density fiberboard panel measuring 12mm in thickness, made from wood fibers bonded with resins, supplied in large sheets for further processing. Classified under HTS 4411.14.10.00 as it exceeds 9mm thickness and is not mechanically worked beyond basic forming or surface covered. Ideal for cabinetry and furniture manufacturing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If mechanically worked or surface covered
Surface coverings like melamine or mechanical profiling move it to the worked/covered subheading.
If thickness 5.5mm to 9mm
Thinner MDF panels fall under the lower thickness subheading regardless of working.
If density exceeds 0.8 g/cm³
High-density fiberboard (HDF) classification based on material density rather than thickness.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify formaldehyde emission levels meet EPA TSCA Title VI standards with proper CARB certification documentation
• Ensure accurate thickness measurement documentation as exceeding 9mm determines this subheading classification
• Avoid common pitfalls by not applying any surface coverings like laminates before import to prevent reclassification
Related Products under HTS 4411.14.10.00
15mm Unsanded MDF Panel
Medium density fiberboard panel at 15mm thickness, untreated and unsanded surface, derived from ligneous materials bonded with organic resins. Fits HTS 4411.14.10.00 criteria as thickness over 9mm with no mechanical working or surface treatment. Commonly used in construction subflooring and shelving bases.
18mm Raw MDF Board for Furniture
Heavy-duty 18mm thick medium density fiberboard sheets, not surface covered or machined, made from wood fibers and resins. HTS 4411.14.10.00 applies due to thickness exceeding 9mm and raw unfinished state. Primary use in flat-pack furniture carcasses and wardrobe backs.
10mm Thickness Unprocessed MDF Slab
Medium density fiberboard slab precisely 10mm thick, in raw form without surface coverings or mechanical processing. Meets HTS 4411.14.10.00 as fiberboard over 9mm not worked. Used as base material for laminated flooring underlayment.
25mm Thick Industrial Raw MDF
Extra-thick 25mm medium density fiberboard panels for industrial applications, untreated surfaces, bonded with resins. Classifies under HTS 4411.14.10.00 for thickness >9mm, no working or covering. Suitable for heavy-duty shelving and machine bases.
11mm Standard Raw MDF Sheet
Common 11mm thickness raw medium density fiberboard sheet, no mechanical working or surface coverings applied. HTS 4411.14.10.00 designation for >9mm thick unprocessed MDF. Widely used in speaker cabinet construction and display fixtures.
20mm Moisture-Resistant Raw MDF
20mm thick medium density fiberboard formulated for moisture resistance through resin additives, but raw and unsanded. Still classifies HTS 4411.14.10.00 as no surface covering or working done. Used in bathroom vanities and kitchen component bases.