Industrial Grade 7mm Raw MDF
7mm thick MDF sheet designed for industrial lamination, in raw form without edges trimmed or surfaces coated. Fits HTS 4411.13.10.00 perfectly as unworked medium density fiberboard 5-9mm thick. Primarily used by manufacturers for overlays and veneers.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If density under 0.5 g/cm³
Low-density fiberboard (LDF) below 0.45 g/cm³ moves to 4411.93.
If considered veneer sheets
Thin sheets for veneering may classify under heading 4408 if under 6mm and sliced.
If paper-impregnated during production
Resin-impregnated paper overlay changes it to Chapter 48 paperboard.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Ensure supplier provides exact thickness tolerance (±0.3mm); declare E0/E1 emission class for residential end-use; inspect for delamination risks upon arrival
Related Products under HTS 4411.13.10.00
9mm Thick Raw MDF Sheet
A standard medium density fiberboard panel measuring 8mm thick, made from wood fibers bonded with resins, in its raw form without mechanical working or surface coverings. Classified under HTS 4411.13.10.00 due to its thickness range of 5-9mm and unprocessed state. Ideal for furniture and cabinetry manufacturing.
Unfinished 1220x2440mm MDF Panel
Standard 3/8-inch (approx. 9mm) MDF board in 4x8 foot size, raw and unsanded from the factory. Meets HTS 4411.13.10.00 criteria as medium density fiberboard not exceeding 9mm thick and without mechanical processing or coatings. Used in shelving and decorative applications.
Moisture-Resistant Raw MDF 8mm
8mm thick medium density fiberboard with added wax for basic moisture resistance, supplied in raw pressed sheets without surface work. Qualifies for HTS 4411.13.10.00 as it's within 5-9mm thickness and not mechanically worked or covered. Common in kitchen cabinet substrates.
E1 Emission Raw MDF 6mm Sheet
Low-formaldehyde E1 compliant 6mm MDF panel, raw pressed without mechanical finishing or coverings. Classified in HTS 4411.13.10.00 for its medium density, 5-9mm thickness, and unprocessed condition. Suitable for interior furniture production.
Standard 5.5mm Raw MDF Board
Entry-level 5.5mm thick medium density fiberboard in large format sheets, completely raw without working. HTS 4411.13.10.00 applies as it exceeds 5mm but not 9mm and lacks surface treatments. Used for lightweight partitions and displays.