White Primed MDF Baseboard Molding
Factory-primed MDF baseboard molding for wall-to-floor transitions, profiled with colonial style edges and thickness not exceeding 5mm. Falls under HTS 4411.12.90.10 as standard medium density fiberboard molding, bonded with resins for stability. Ideal for residential trim applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If made from particle board rather than fiberboard
Particle board moldings classify under 4411.92 due to different manufacturing process using wood particles vs fibers.
If cut to specific lengths for retail sale as trim sets
Pre-cut retail trim kits may qualify as builders' joinery or assembled moldings under 4418.90.
If surface heavily coated resembling stone panels
Panels or tiles with substantial mineral coatings shift to Chapter 68 as worked stone materials.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide mill test reports certifying MDF composition and density; check for CARB Phase 2 or EPA TSCA certification to avoid holds; measure profile thickness precisely as CBP uses calipers for verification
Related Products under HTS 4411.12.90.10
Primed MDF Door Casing Molding
Primed medium density fiberboard (MDF) molding designed for interior door casings, typically 3/4 inch thick and under 5mm in profiled sections. Classified under HTS 4411.12.90.10 as standard wood molding made from MDF of thickness not exceeding 5mm, used for architectural trim. The fiberboard composition and molding profile distinguish it from solid wood or other boards.
MDF Crown Molding for Cabinets
Medium density fiberboard crown molding strips under 5mm thick, profiled for kitchen cabinet valances and cornices. HTS 4411.12.90.10 applies to this standard wood molding from ligneous materials bonded with resins. Provides smooth, paintable finish for millwork.
Unprimed MDF Chair Rail Molding
Unfinished medium density fiberboard chair rail molding, ≤5mm thick, with ogee profile to protect walls from chair backs. Classified as standard wood molding under HTS 4411.12.90.10 for its fiberboard base and architectural use. Commonly stained or painted on-site.
MDF Picture Frame Molding
Profiled medium density fiberboard molding for picture frames, thickness not exceeding 5mm, often gilded or painted. HTS 4411.12.90.10 covers this standard wood molding from ligneous materials. Lightweight alternative to solid wood for framing applications.
Primed MDF Window Apron Molding
Primed MDF molding for window aprons, profiled sub-5mm thick strips below sills. Standard wood molding per HTS 4411.12.90.10 due to medium density fiberboard construction with resin binders. Used in interior window trim packages.
MDF Stool Molding for Windows
Medium density fiberboard window stool molding, ≤5mm thick profiled edge, for sill extensions. Classifies under HTS 4411.12.90.10 as standard MDF wood molding. Provides durable, paint-ready trim.