3mm Poplar MDF Sheet
Thin medium density fiberboard sheet from poplar wood fibers, exactly 3mm thick, oil-treated for handling stability but otherwise bare. Fits HTS 4411.12.60.00 as uncovereod MDF under 5mm thickness, bonded with resins during manufacture.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness over 5.18mm
Thicker MDF boards enter 4411.14 subheading based on exact thickness thresholds.
If in pellet form from MDF waste
Wood pellets from processing waste agglomerated per subheading note go to Chapter 44 heading 4401.
If imported as reconstructed wood panels
If marketed as 'reconstituted panels' with different bonding, may shift to 4418.40.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Measure thickness precisely (<5mm required); use calipers and include spec sheets
• Oil treatment must be minimal (<3% binder per chapter notes analogy); disclose formula
• Label as 'MDF not surface-covered' to prevent reclassification during entry
Related Products under HTS 4411.12.60.00
12mm Baltic Birch MDF Panel
A medium density fiberboard (MDF) panel made from birch wood fibers, with a thickness of 12mm, not surface-covered except for minimal oil treatment to prevent moisture absorption. Classified under HTS 4411.12.60.00 as it meets the MDF definition of density between 0.45-0.80 g/cm³, thickness not exceeding 5mm in certain variants, and lacks paint, veneer, or laminate coating.
5mm Pine MDF Board
Medium density fiberboard board sourced from pine wood, 5mm thick maximum, featuring only oil treatment for surface protection without additional coverings. HTS 4411.12.60.00 applies to this bare MDF product used in furniture underlayment.
2.5mm Acacia MDF Sheet
Ultra-thin 2.5mm MDF sheet from acacia wood fibers, oil-treated solely, ideal for model-making and crafts. HTS 4411.12.60.00 covers this non-surface-covered medium density product.
4mm Eucalyptus MDF Panel
Eucalyptus-sourced medium density fiberboard panel, 4mm thick, untreated beyond light oil application for anti-stick properties. Meets precise criteria of HTS 4411.12.60.00 for thin, uncovered MDF.
Standard 5mm MR MDF
Moisture-resistant grade medium density fiberboard, 5mm thick from mixed wood fibers, with oil impregnation only—no melamine or laminate. Precisely HTS 4411.12.60.00 as uncovered thin MDF.