Standard Pine Particle Board
Particle board made from pine wood particles agglomerated with resins, used primarily for furniture construction and interior paneling. It falls under HTS 4410.19.00 as it is neither oriented strand board (OSB) nor waferboard, but a standard particle board of wood. Typical thickness ranges from 9mm to 25mm for construction applications.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If specifically oriented strand board (OSB)
OSB has strands oriented in layers for structural strength, classified separately under 4410.11 while standard particle board uses randomly oriented particles.
If plywood with at least one outer ply of tropical wood
Plywood construction with veneers distinguishes it from particle board, moving to Chapter 44 heading 4412.
If laminated with plastic facing for finished panels
Surface-covered or laminated panels for specific uses like cabinetry fall under 4418 rather than basic agglomerated board.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify formaldehyde emission compliance with EPA TSCA Title VI standards; provide CARB Phase 2 or TSCA certification
• Include detailed mill test reports showing wood species, resin content, and density to avoid misclassification
• Check for ISPM 15 heat treatment markings if used in packaging to prevent pest-related quarantines
Related Products under HTS 4410.19.00
Birch Wood Chipboard
Chipboard produced from birch wood chips and flakes bound with urea-formaldehyde resin, commonly used for shelving and cabinet backs. Classified under HTS 4410.19.00 as 'other' particle board of wood, not meeting OSB or waferboard specifications. Available in standard sizes like 4x8 feet sheets.
Mixed Hardwood Particle Board
Particle board from mixed hardwood sawdust and shavings, agglomerated with synthetic resins for flat-pack furniture applications. HTS 4410.19.00 covers this as other wood-based particle board excluding OSB. Often finished with melamine laminate on one side.
Poplar Strawboard Particle Panel
Engineered board combining poplar wood particles with straw fibers, bound by resins for economical furniture core stock. Falls under HTS 4410.19.00 as other wood particle board per chapter notes including ligneous materials. Density typically 700 kg/m³.
Eucalyptus Wood Flakeboard
Flakeboard made from eucalyptus wood flakes agglomerated with phenolic resins, used in structural subflooring and wall sheathing. HTS 4410.19.00 applies to this non-OSB wood particle board variant. Sheet size commonly 1220x2440mm.
MDF-Core Particle Board
Hybrid panel with particle board core surfaced with medium density fiberboard (MDF), used for painted furniture components. Still primarily particle board of wood under HTS 4410.19.00 before lamination consideration. Improves screw-holding strength.
Recycled Wood Particle Board
Particle board manufactured from 100% recycled wood waste including sawdust and shavings, bound with low-emission resins. HTS 4410.19.00 classification unchanged by recycled origin as it's still wood particle board. Popular for sustainable furniture production.