Millwork Core Particle Board 5/8 Inch
5/8 inch particle board cores designed for laminated millwork and casework, void-free with balanced construction. HTS 4410.19.0060 as 'other' wood particle board for architectural applications. Serves as base for veneer or laminate trim.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If veneer-faced rather than solid core
Sheets of veneered wood classified in heading 4408 regardless of core material.
If machined into cellular ceramic sink tops
Assembled ceramic/wood composite sanitary ware classified by function.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Cross-section samples may be required to verify void-free construction for millwork grade
• Sandability and screw-holding test data recommended for quality verification
• Color consistency critical; mixed batches rejected by fabricators
Related Products under HTS 4410.19.00.60
MDF Particle Board 4x8 Sheet 3/4 Inch
Medium density fiberboard (MDF) sheets measuring 4 feet by 8 feet and 3/4 inch thick, made from wood fibers agglomerated with resins. Classified under HTS 4410.19.0060 as 'other' particle board of wood, not qualifying as OSB or waferboard. Commonly used for cabinetry, furniture, and millwork.
OSB Sheathing Panel 7/16 Inch Tongue & Groove
Oriented strand board (OSB) panels 7/16 inch thick with tongue-and-groove edges, made from large wood strands oriented in cross-layers and bonded with resins. Falls under HTS 4410.19.0060 as 'other' wood board despite OSB naming in heading, for non-standard thicknesses. Used in wall sheathing and roofing applications.
Waferboard Construction Panel 23/32 Inch
Waferboard panels made from large wood wafers randomly oriented and bonded with phenolic resins, 23/32 inch thick. Classified in HTS 4410.19.0060 as 'similar board' of wood, equivalent to OSB but with random strand orientation. Primarily used for subflooring and single-layer flooring.
Underlayment Particle Board 1/4 Inch
Thin particle board sheets 1/4 inch thick designed for flooring underlayment, made from wood particles and isocyanate binders. HTS 4410.19.0060 covers this as 'other' non-structural particle board of wood. Provides smooth surface under vinyl or carpet flooring.
Furniture Core MDF 19mm Baltic Birch Alternative
19mm thick MDF panels specifically formulated for furniture carcass construction, using hardwood fibers and low-formaldehyde resins. Falls under HTS 4410.19.0060 as particle board variant for non-structural furniture applications. Offers cost-effective alternative to plywood.
Shelf Board Particle Board Melamine Faced
Pre-cut shelf boards of particle board with white melamine facing on both sides, typically 3/4 inch x 12 inch x 96 inch. HTS 4410.19.0060 as basic wood particle board before lamination classification applies. Used in retail shelving and closet organization systems.