19/32-inch OSB Wall Sheathing
19/32-inch oriented strand board specifically for exterior wall sheathing, sanded finish, with square edges and high strength-to-weight ratio. Falls under HTS 4410.12.0010 as sanded OSB of wood, agglomerated with binding substances. Provides bracing and racking resistance in framing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further worked with surface coating
Surface-covered OSB moves to 4410.22, even if minimally processed beyond sanding
If in pellet form from manufacturing waste
Wood processing by-products agglomerated into pellets classified under 4401 per subheading note
If for use in prefabricated construction doors
Panels specifically for doors in builders' joinery fall under 4418.20
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include wind load and shear wall ratings in import documentation for code compliance
• Avoid customs issues by distinguishing from unsanded rough OSB under same subheading
• Certify no added treatments beyond basic wax for water repellency
Related Products under HTS 4410.12.00.10
7/16-inch Oriented Strand Board (OSB) Sheathing
This is structural oriented strand board measuring 7/16 inch thick, sanded on one side, used primarily for wall sheathing and roof underlayment in residential construction. It falls under HTS 4410.12.0010 as OSB of wood that is unworked or only sanded, with strands oriented in specific layers and bound with resins. Meets standards for exposure durability in construction applications.
23/32-inch OSB Roof Sheathing Panels
Oriented strand board panels at 23/32 inch thickness, sanded surface, designed specifically for roof decking with enhanced span ratings. Classified under HTS 4410.12.0010 as unworked or sanded OSB made from wood flakes agglomerated with resins. Provides structural support and weather resistance during construction.
5/8-inch OSB Subfloor Panels
Sanded 5/8-inch thick oriented strand board panels rated for subflooring applications, with tongue-and-groove edges for seamless installation. HTS 4410.12.0010 applies to this wood-based OSB not further worked than sanded, bound by organic resins. Ideal for single or double layer flooring in homes.
APA Rated Sturd-I-Floor OSB Panels
APA trademarked Sturd-I-Floor OSB panels, sanded, 23/32-inch thick with tongue-and-groove edges for combination subfloor/underlayment. Classified in HTS 4410.12.0010 as oriented strand board of wood, unworked beyond sanding despite edge profiling. Meets stringent performance standards for joist spacing.
Exposure-1 Rated OSB Sheathing
Oriented strand board rated Exposure-1 for limited water exposure during construction, sanded surface, typically 7/16-inch for sheathing. HTS 4410.12.0010 covers this sanded wood OSB bound with resins, suitable for siding and structural panels. Wax overlay provides temporary protection.
Structural 1 OSB Panels 4x8 Feet
Structural 1 grade OSB panels in standard 4x8 foot size, sanded, for high-load bearing applications like flooring and roofing. Fits HTS 4410.12.0010 as unworked/sanded oriented strand board of wood with cross-oriented strands. Higher quality control than Structural 2 grade.