Underlayment Particle Board 1/4 Inch
Thin 1/4 inch particle board designed for flooring underlayment, made from wood particles compressed with waterproof resins. Falls under HTS 4410.11.00 as basic particle board of wood without special orientation. Provides smooth subfloor surface for vinyl or carpet installation.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If fiberboard density 0.5-0.8 g/cm³
Medium density fiberboard (MDF) under 4411.93 if fibers rather than discrete particles used.
If insufficient resin binding, crumbly texture
Unagglomerated wood waste particles classify under 4401, but lightly bound under 4410.31 if not fully board.
If blocked/edge-glued for door blanks
Edge-glued wood blocks of particle board become 4412.94 for specific end uses like doors.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Test for tongue-and-groove edges; loose particles during inspection can trigger reclassification as waste
• Label with minimum thickness tolerance (±0.005") to meet flooring standards and avoid commercial value disputes
• Include VOC emission test results; California Air Resources Board Phase 2 compliance mandatory for U.S. market
Related Products under HTS 4410.11.00
MDF Particle Board 4x8 Sheet 3/4 Inch
Medium density fiberboard (MDF) particle board made from wood fibers agglomerated with resins, cut into standard 4x8 foot sheets with 3/4 inch thickness. Classified under HTS 4410.11.00 as particle board of wood, not oriented strand board. Commonly used for cabinetry and furniture cores due to smooth surface.
OSB Particle Board Sheathing 7/16 Inch
Oriented strand board (OSB) made from wood strands oriented in layers and bonded with resins, primarily 7/16 inch thick for wall sheathing. While hierarchy includes OSB, this specific product is standard particle/strand board of wood under 4410.11.00. Used in construction for structural panels.
Furniture Core Particle Board 5/8 Inch
5/8 inch thick particle board specifically manufactured for furniture carcasses and shelving, using interior-grade resins for low formaldehyde. HTS 4410.11.00 classification as wood particle board agglomerated with organic binders. Smooth edges suitable for edge banding.
Waferboard Construction Panel 23/32 Inch
Waferboard panels made from large wood wafers randomly oriented and bonded with phenolic resins, 23/32 inch thick for roof and wall sheathing. Included in HTS 4410.11.00 as similar board of wood particles. Structural-rated for exposure to weather during construction.
Low-Emission E0 Particle Board 1/2 Inch
E0 grade particle board with ultra-low formaldehyde emissions (<0.5 ppm), 1/2 inch thick from select wood particles and bio-resins. HTS 4410.11.00 as standard wood particle board. Ideal for baby furniture and indoor cabinetry.
Moisture-Resistant MR Particle Board 18mm
18mm moisture-resistant particle board with added waxes and special resins for bathroom and kitchen applications. Classifies under HTS 4410.11.00 as wood particle board regardless of moisture additives. Green color coding for easy identification.