Walnut Casing Door Trim
Walnut wood door casing with colonial profile including ogee curves, beaded edges, and chamfered returns, planed and finger-jointed. Classifies as HTS 4409.29.51.00 nonconiferous wood molding continuously shaped along any edges or faces. Used around doors and windows.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If lengths exceed 3 meters or pre-cut to exact door sizes
Pre-cut joinery components for specific installations classify as builders' mouldings.
If imported as rough sawn lumber before shaping
Unshaped nonconiferous wood in boards/thicknesses over 6mm falls under sawn wood chapter.
If oiled or waxed beyond simple sanding
Surface treatments creating wood-like finish move to completed wood articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Separate invoice lines for different profiles (casing vs. header) to avoid averaging issues
ā¢ Ensure no pre-applied finishes exceed HTS material tolerances; declare as unfinished
Related Products under HTS 4409.29.51.00
Oak Wood Crown Molding
Decorative oak wood crown molding with profiled edges including cyma curves and beaded details, planed and sanded for smooth finish. Classified under HTS 4409.29.51.00 as nonconiferous wood molding continuously shaped along edges and faces but not assembled. Used primarily for interior trim in residential construction.
Mahogany Baseboard Molding
Mahogany wood baseboard with rebated bottom edge, V-jointed profile, and chamfered top, end-jointed for longer lengths. Falls under HTS 4409.29.51.00 as nonconiferous continuously shaped wood molding, planed but not assembled into finished trim. Ideal for high-end flooring transitions.
Cherry Wood Chair Rail Molding
Premium cherry hardwood chair rail molding featuring beaded edges, rounded profiles, and end-jointed construction, sanded smooth. HTS 4409.29.51.00 covers this nonconiferous wood molding shaped continuously along edges for wainscoting applications. Not assembled into panels.
Maple Wood Picture Frame Molding
Hard maple wood picture frame molding with reeded profiles, rounded edges, and V-jointed backs, kiln-dried and sanded. HTS 4409.29.51.00 applies to this nonconiferous continuously shaped molding not assembled into frames. Sold to frame manufacturers.
Beech Wood Panel Molding
European beech wood panel molding featuring astragal beads, fluted profiles, and tongue-and-groove edges, end-matched. Covered by HTS 4409.29.51.00 as nonconiferous wood moldings continuously shaped along multiple edges. Used for raised panel doors.
Teak Wood Quarter Round Molding
Solid teak quarter round molding with perfectly rounded profile, planed faces, and end-jointed lengths up to 16 feet. HTS 4409.29.51.00 classification for nonconiferous wood continuously shaped along edges for flooring/baseboard transitions. Highly durable for humid environments.