Pine Wood Siding Boards
Pine wood siding boards featuring tongue-and-groove edges for seamless installation on exterior walls. These nonconiferous wood panels are continuously shaped along edges and faces, planed and sanded for smooth finish, specifically classified as wood siding under HTS 4409.29.11.00. Ideal for residential and commercial building exteriors.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not continuously shaped along edges or faces
Unshaped sawn nonconiferous wood boards classify as sawn timber under 4407, lacking profiled edges.
If made from coniferous wood like spruce
Coniferous profiled wood siding falls under the coniferous subheading 4409.21.
If assembled into panels or larger structures
Assembled wooden panels for siding are classified under reconstructed wood products in 4418.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Verify wood species documentation to confirm nonconiferous classification; pine must be certified as non-coniferous
ā¢ Ensure phytosanitary certificates comply with USDA APHIS requirements for wood imports to prevent pest introduction
ā¢ Label shipments clearly as 'wood siding' to avoid misclassification as lumber under Chapter 44 headings
Related Products under HTS 4409.29.11.00
Oak Shiplap Siding Planks
Oak shiplap siding planks with rebated edges for overlapping installation, providing weather-resistant exterior cladding. These are nonconiferous hardwood boards continuously shaped, V-jointed, and end-jointed, meeting the precise definition of wood siding in HTS 4409.29.11.00.
Cedar Beaded Siding Panels
Western red cedar beaded siding panels with beaded profiles along faces and tongue-groove edges for traditional exterior applications. Nonconiferous wood continuously shaped along multiple edges and faces, planed for finish, classified as wood siding per HTS 4409.29.11.00.
Mahogany Tongue-and-Groove Siding
Premium mahogany tongue-and-groove siding boards for high-end exterior and interior wall applications. These nonconiferous hardwood planks are continuously shaped along edges, sanded, and end-jointed, fitting HTS 4409.29.11.00 wood siding specifications.
Poplar V-Jointed Siding Strips
Poplar wood siding strips with V-jointed edges for rustic exterior board-and-batten applications. Nonconiferous softwood continuously shaped along edges and faces, planed and finger-jointed, classified under HTS 4409.29.11.00 as wood siding.
Aspen Chamfered Siding Boards
Aspen chamfered edge siding boards designed for modern minimalist exterior cladding. These nonconiferous wood boards feature continuous chamfer shaping along edges, sanded surfaces, and precise end-matching for HTS 4409.29.11.00 wood siding.
Birch Molded Siding Planks
Birch wood siding planks with molded edge profiles for premium residential exteriors. Nonconiferous hardwood continuously shaped (molded and rebated), planed, and sanded per HTS 4409.29.11.00 wood siding requirements.