Planed Bamboo Chamfered Edge Skirting Boards
Long bamboo strips planed smooth with chamfered (beveled) edges along the top face, designed as baseboard skirting for floors. Classified in HTS 4409.21.90.00 as other bamboo wood continuously shaped along edges or faces, nonconiferous and unassembled. The chamfering prevents splintering and aids installation against walls.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sawn Hem-fir boards without profiling
Unprofiled coniferous lumber like Hem-fir is in 4407; shaping elevates to 4409 but species changes subheading.
If shaped and molded for cellular wood skirting
Cellular or composite wood moldings fall under 4418.40, distinguished by material density and composition.
If imitations from agglomerated stone or cement
Non-wood imitations of profiled moldings are in Chapter 68, based on primary material not being wood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Include technical drawings showing chamfer dimensions to prove continuous shaping; measure angle consistency
ā¢ Avoid bundling with installation hardware, as sets could be classified differently under composite goods rules
ā¢ Certify bamboo origin and treatment (e.g
ā¢ kiln-dried) to meet phytosanitary requirements and prevent pest issues
Related Products under HTS 4409.21.90.00
Bamboo Tongue-and-Groove Flooring Strips
These are strips of bamboo wood that have been continuously shaped with tongue-and-groove profiles along the edges for easy interlocking during installation. They are planed and sanded for a smooth finish but not assembled into flooring panels, classifying them under HTS 4409.21.90.00 as nonconiferous bamboo wood with profiled edges. The shaping meets the criteria for tongued, grooved, or similar along edges or faces.
Sanded Bamboo V-Jointed Wall Panelling Strips
Bamboo strips shaped with V-joints along the longitudinal edges, sanded for a refined surface, used primarily for interior wall panelling. They qualify under HTS 4409.21.90.00 as 'other' nonconiferous bamboo wood continuously shaped (V-jointed) but not assembled. The V-jointing provides a decorative bevelled edge for seamless panel installation.
Bamboo Beaded Edge Decorative Frieze Strips
Thin bamboo friezes with beaded (rounded) profiles continuously shaped along both longitudinal edges for ornamental ceiling or wall trim. They fall under HTS 4409.21.90.00 as nonconiferous bamboo, other profiled wood not assembled. The beading adds aesthetic detail while maintaining structural integrity for trim applications.
Molded Bamboo Rebated Panel Moulding Strips
Bamboo wood strips molded with rebated (stepped) edges for joining panels, sanded and end-jointed minimally for stability. HTS 4409.21.90.00 covers these as other continuously shaped (rebated) bamboo, nonconiferous, unassembled. Rebating allows flush panel connections in cabinetry or furniture.
Rounded Edge Bamboo Stair Nosing Strips
Bamboo strips with rounded profiles along the front edge and groove on the back for stair tread installation. Classified under HTS 4409.21.90.00 as other bamboo continuously shaped (rounded, grooved), nonconiferous and not assembled. Provides safety and finish for staircase edges.
End-Jointed Bamboo Shiplap Siding Strips
Bamboo siding strips with shiplap profile (rebate on edges for overlap) and minimal end-jointing for length consistency. HTS 4409.21.90.00 includes these as other profiled bamboo wood, nonconiferous, unassembled. Shiplap allows weather-tight exterior wall cladding.