Pine Chair Rail Molding
Decorative pine chair rail molding with V-jointed and molded profiles to protect walls from furniture. HTS 4409.10.40 covers this Pinus spp. coniferous wood shaped continuously along edges and faces. Planed, sanded, and suitable for traditional interior trim.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| šØš³China | Free | +35.0% | 35% |
| š²š½Mexico | Free | +10.0% | 10% |
| šØš¦Canada | Free | +10.0% | 10% |
| š©šŖGermany | Free | +10.0% | 10% |
| šÆšµJapan | Free | +10.0% | 10% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If specifically pine shutter stock molding
Dedicated subheading exists for pine wood shaped as shutter components.
If sheets or tiles rather than linear moldings
Shaped wood panels for flooring/ceilings use heading 4408 separate from linear moldings.
If pressure-impregnated with preservatives
Chemically treated shaped wood classifies under specific impregnated wood heading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
ā¢ Specify 'not assembled' status clearly; assembled rails go to heading 4418
ā¢ Test for moisture content; kiln-dried specs prevent reclass to wet wood provisions
ā¢ Separate shipments from parquet strips to avoid averaging into mixed Chapter 44 entries
Related Products under HTS 4409.10.40
Pine Baseboard Molding
Standard pine (Pinus spp.) baseboard molding with tongue-and-groove edges, planed and sanded for smooth finish. Classified under HTS 4409.10.40 as coniferous wood continuously shaped along edges for architectural trim use. Meets criteria for standard wood moldings from pine species.
Pine Crown Molding
Ornate pine crown molding with profiled edges, rebated and beaded along faces for ceiling-wall transitions. HTS 4409.10.40 applies to this continuously shaped pine (Pinus spp.) coniferous standard wood molding. Typically planed and end-jointed for installation.
Pine Casing Molding
Pine (Pinus spp.) door and window casing molding, chamfered and rounded along edges for smooth trim application. Falls under HTS 4409.10.40 as standard coniferous wood molding continuously shaped on multiple faces. Sanded surface ready for painting or staining.
Pine Quarter Round Molding
Small pine quarter-round molding, rounded along one edge for finishing floor-wall transitions. Precisely fits HTS 4409.10.40 as standard Pinus spp. coniferous wood molding continuously shaped. End-jointed lengths up to 16 feet standard.
Pine Astragal Molding
Pine astragal molding for meeting door edges, with centered bead profile shaped along face. Classifies under HTS 4409.10.40 as coniferous pine standard wood molding continuously shaped. Smooth planed surface for paint-grade applications.
Pine Jamb Molding
Pine jamb extension molding, rebated edges for door frame extensions in thick walls. HTS 4409.10.40 designation for Pinus spp. continuously shaped coniferous standard moldings. Sanded and primed-ready surface common.