Pine Picture Frame Molding
Pine picture frame molding is beaded and molded continuously along its faces for constructing decorative frames. This Pinus spp. product meets HTS 4409.10.40.90 criteria for unassembled, edge-shaped coniferous standard moldings. It arrives sanded and ready for gilding or painting by frame makers.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If compressed sawdust/pine chip pellets
Agglomerated pine by-products meeting pellet dimensions fall under 4401.31 per subheading note, not shaped lumber.
If veneer-faced or laminated construction
Laminated or veneered wooden moldings classify under heading 4414 for densified or layered wood products.
If when pre-assembled into complete frames
Fully assembled picture/photo frames with shaped wood become furniture parts under Chapter 94 heading 9403.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm length under 100mm cross-section limits if pellet-like but verify molding profile; use clear photography in entries showing edge shaping; test for formaldehyde emissions compliance
Related Products under HTS 4409.10.40.90
Pine Crown Molding
Pine crown molding features a decorative profile continuously shaped along its edges and faces for architectural trim applications. It is made from Pinus spp. pine and qualifies under HTS 4409.10.40.90 as standard coniferous wood molding that is tongued, grooved, or otherwise profiled but not assembled. The wood is typically planed and sanded for smooth installation in residential interiors.
Pine Baseboard Molding
Pine baseboard molding is continuously rebated and shaped along its bottom edge to fit against flooring while providing a finished wall transition. Classified under HTS 4409.10.40.90 for standard pine (Pinus spp.) moldings that are edge-profiled but remain unassembled strips. It is commonly sanded for paint-ready surfaces in home construction.
Pine Casing Molding
Pine casing molding has a chamfered and beaded profile continuously shaped along both edges for framing doors and windows. This standard Pinus spp. product falls under HTS 4409.10.40.90 as unassembled coniferous wood molding suitable for interior trim. It is typically end-jointed for longer runs without exceeding shaping limitations.
Pine Chair Rail Molding
Pine chair rail molding features a rounded and V-jointed profile continuously shaped to protect walls from chair backs. Made from Pinus spp., it classifies under HTS 4409.10.40.90 as standard coniferous molding strips not assembled into finished products. The wood is planed for smooth application midway up interior walls.
Pine Quarter-Round Molding
Pine quarter-round molding has a continuous 90-degree rounded profile shaped along its length for finishing floor-wall junctions. Classified as standard Pinus spp. molding under HTS 4409.10.40.90, it remains unassembled with tongued or grooved options. Commonly used in baseboard extensions and stair nosings.
Pine Astragal Molding
Pine astragal molding features a V-jointed and beaded continuous shape for sealing double doors. This standard coniferous product from Pinus spp. is covered by HTS 4409.10.40.90 as unassembled edge-profiled wood. It is planed for precise fitting in paired door applications.