Douglas Fir Engineered Wood Flooring Strips
Douglas fir strips with machined V-jointed edges and rebated ends, end-jointed for length stability, intended for wood flooring applications. Falls under HTS 4409.10.20.00 as coniferous 'other' wood flooring continuously shaped but not assembled, planed and sanded surfaces.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from Hem-Fir mixed stands
Hem-Fir coniferous wood has dedicated subheading even when profiled for flooring.
If over 6mm thick with veneer face
Veneered wood panels shift to heading 4408 regardless of edge profiling.
If density exceeds 0.5 g/cm³
Densified profiled coniferous wood moves to heading 4412 from standard shaped wood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide species verification excluding Hem-Fir classification; declare exact shaping profiles in entry docs; watch for minimum thickness requirements to avoid Chapter 44 parts classification
Related Products under HTS 4409.10.20.00
Pine Tongue and Groove Wood Flooring
Pine wood flooring planks featuring tongue and groove profiles along the edges for seamless installation, planed and sanded for smooth finish. Classified under HTS 4409.10.20.00 as coniferous wood continuously shaped along edges specifically for flooring use, not assembled into parquet. Meets criteria for wood flooring in 'other' coniferous category excluding spruce-pine-fir.
Cedar Beaded Edge Parquet Strips
Western red cedar strips for parquet flooring with beaded and chamfered edges, machined continuously along faces and ends, unassembled. HTS 4409.10.20.00 applies to this coniferous wood flooring due to shaping for parquet use, sanded finish.
Hemlock Chamfered Wood Flooring Planks
Eastern hemlock planks with chamfered long edges and tongue-groove short ends for flooring, planed and finger-jointed. While Hem-Fir has specific codes, this non-mixed hemlock qualifies under HTS 4409.10.20.00 as 'other' coniferous continuously shaped wood flooring.
Larch Molded Profile Flooring Boards
European larch boards with molded edge profiles including rebate and bead detailing, end-matched for flooring installation, sanded. Classifies in HTS 4409.10.20.00 as coniferous 'other' wood flooring continuously shaped along multiple edges.
White Fir V-Jointed Wood Floor Strips
White fir narrow strips featuring V-joint along long edges and grooved ends, kiln-dried and surfaced for interior flooring. HTS 4409.10.20.00 covers this 'other' coniferous shaped wood flooring product, unassembled.
Alpine Fir Tongue and Groove Flooring
Alpine fir planks with precision tongue and groove milling along all four edges, end-jointed, for rustic flooring applications. Fits HTS 4409.10.20.00 as continuously shaped coniferous wood flooring in the 'other' category.