Burr Oak Figured Veneer Sheets
Figured burr oak (Quercus macrocarpa) veneer, sliced thin at ≤6 mm, prized for decorative furniture surfaces and showcasing natural burr patterns. Planed and sanded for premium lamination uses. Classified precisely under HTS 4408.90.0181 for oak veneering sheets.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If specifically Quercus robur or Q. petraea
Certain European oak species have dedicated statistical suffixes within oak veneers.
If shaped into specific decorative articles
Further worked into articles like inlays shifts to heading 4421 for other wood articles.
If agglomerated into briquettes
Wood by-products compressed into briquettes are under 4401.32, not veneers.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document figure type and origin for valuation purposes; comply with Lacey Act declarations for US oak; inspect for moisture content to prevent damage claims
Related Products under HTS 4408.90.01.81
Red Oak Veneer Sheets
Thin sheets of red oak (Quercus rubra) wood, sliced to a thickness not exceeding 6 mm, used primarily for veneering furniture and cabinetry. These sheets are sawn lengthwise and may be sanded or end-jointed for seamless application in plywood production. Classified under HTS 4408.90.0181 as oak veneering sheets meeting the thickness and species criteria.
White Oak Sliced Veneer Panels
Sliced white oak (Quercus alba) veneer sheets, planed and sanded, with thickness ≤6 mm for high-end interior paneling and flooring underlay. Sourced from Quercus spp., these are ideal for laminated wood applications. Fits HTS 4408.90.0181 due to oak species and veneering specifications.
European Oak End-Jointed Veneer
End-jointed veneer sheets from European oak (Quercus robur), peeled and spliced for continuous lengths, thickness not exceeding 6 mm, used in boat building and architectural millwork. Meets precise definition for oak veneering in HTS 4408.90.0181.
Sanded Live Edge Oak Veneer
Live edge oak veneer sheets from Quercus spp., sanded to ≤6 mm thickness, retaining natural edge for rustic cabinetry and wall paneling applications. Sawn lengthwise for veneering plywood. HTS 4408.90.0181 applies to these other oak sheets.
Quercus Prinus Quarter-Sawn Veneer
Quarter-sawn veneer from swamp white oak (Quercus bicolor/prinus), precisely sliced to under 6 mm for stable musical instrument backs and fine joinery. End-jointed for uniformity. Falls under HTS 4408.90.0181 as other oak veneering sheets.
Oak Spliced Backer Veneer
Spliced oak backer veneer sheets (Quercus spp.), ≤6 mm thick, designed as substrate for multi-layer laminates in engineered flooring. Spliced for cost-efficiency and strength. HTS 4408.90.0181 covers these utility oak veneers.