Red Oak Veneer Sheets for Cabinetry
Thin red oak (Quercus spp.) veneer sheets, sliced to 0.6 mm thickness, planed and sanded for smooth application in plywood cabinet doors and panels. Classified under HTS 4408.90.01.76 as red oak veneering sheets not exceeding 6 mm thick, sawn lengthwise or sliced for laminated wood applications.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not specifically red oak variety
Other oak species (Quercus spp.) excluding red oak fall under the general oak subheading.
If further laminated into plywood panels
Once assembled into plywood sheets, it shifts from raw veneers to finished plywood under Chapter 44 heading 4412.
If thickness exceeds 6 mm
Thicker sawn oak wood is classified as lumber rather than thin veneering sheets.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Quercus spp. red oak via phytosanitary certificates to meet 4408.90.01.76 requirements
• Measure thickness precisely (≤6mm) and document slicing method to avoid reclassification to thicker lumber under 4407
• Include end-use declarations if for plywood vs furniture to prevent customs disputes on veneering intent
Related Products under HTS 4408.90.01.76
Sanded Red Oak Veneer for Furniture Panels
Planed and sanded red oak veneer sheets, 1.5 mm thick, sourced from Quercus rubra, spliced for seamless plywood furniture tabletops and side panels. Meets HTS 4408.90.01.76 as red oak sheets sliced lengthwise for veneering, under 6 mm thickness.
End-Jointed Red Oak Veneer for Flooring Underlay
Red oak (Quercus spp.) veneers peeled to 3 mm, end-jointed for continuous lengths, used in laminated wood flooring substrates. Fits HTS 4408.90.01.76 criteria for sliced/peeled red oak sheets ≤6 mm thick for similar laminated wood.
Sliced Red Oak Veneer Sheets for Wall Paneling
Lengthwise-sliced red oak veneers, 0.8 mm thick, sanded and spliced for decorative plywood wall paneling in commercial interiors. Precisely under HTS 4408.90.01.76 as other red oak (Quercus spp.) veneering sheets not over 6 mm.
Planed Red Oak Veneer for Musical Instruments
High-grade planed red oak veneer sheets, 2 mm thick from Quercus spp., peeled for laminated soundboards in guitars and violins. Classifies to HTS 4408.90.01.76 for thin red oak sheets intended for specialized laminated wood.
Quercus Rubra Red Oak Veneer for Boat Interiors
Sliced Quercus rubra (northern red oak) veneers, 4 mm thick, end-jointed and sanded for marine plywood in yacht cabin paneling. HTS 4408.90.01.76 applies to these red oak veneering sheets ≤6 mm for laminated applications.
Spliced Red Oak Veneer Rolls for Architectural Millwork
End-jointed and spliced red oak (Quercus spp.) veneer in continuous rolls, 1.2 mm thick, sliced for custom plywood millwork in commercial buildings. Covered by HTS 4408.90.01.76 as processed red oak veneering sheets under 6 mm.