Rotary Cut Birch Veneer Sheets
Thin birch wood veneer sheets obtained by rotary cutting from Betula spp. logs, typically 0.6mm thick, used for plywood facing. These sheets are planed and sanded for smooth lamination and fall under HTS 4408.90.01.61 due to their birch species origin and thickness not exceeding 6mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness exceeds 6mm
Veneer exceeding 6mm thickness shifts to sawn coniferous wood under Chapter 44 heading 4407.
If sourced from other hardwood species like oak
Different wood species like oak or maple classified separately within the same veneer subheading.
If further laminated into plywood panels
Once processed into finished plywood sheets, moves to heading 4412 for plywood products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify birch species certification with phytosanitary certificates; ensure moisture content documentation under 12%; avoid misclassification as thicker lumber
Related Products under HTS 4408.90.01.61
Sliced Birch Veneer for Cabinetry
High-quality sliced birch (Betula spp.) veneer panels, 1.5mm thick, end-jointed for seamless patterns in furniture manufacturing. Sanded for adhesion in laminated wood applications, specifically classified under HTS 4408.90.01.61 for birch veneers ≤6mm.
Spliced Birch Veneer Sheets
Betula spp. birch veneer sheets spliced edge-to-edge for wider coverage, 2mm thickness, planed for plywood overlay. Meets HTS 4408.90.01.61 as sliced/peeled birch wood ≤6mm, commonly used in interior paneling.
FSC Certified Birch Veneer Panels
Sustainably sourced Betula pendula birch veneer, peeled to 0.8mm thickness, sanded and certified for green building plywood. Classified in HTS 4408.90.01.61 for birch species veneers not exceeding 6mm.
Book-Matched Birch Veneer
Premium book-matched sliced birch (Betula spp.) veneer sheets, 1.2mm thick, for symmetrical grain patterns in high-end furniture. Planed and end-jointed, fits HTS 4408.90.01.61 as birch veneering sheets ≤6mm.
Planed Birch Plywood Veneer
Planed Betula pubescens birch veneer slices, 3mm thick, for core lamination in structural plywood panels. Spliced for uniformity, under HTS 4408.90.01.61 for birch ≤6mm veneers.
Sanded Birch Door Skin Veneer
Sanded Betula spp. veneer sheets, 2.5mm, designed as door skins for interior flush doors via lamination. Lengthwise sliced for consistent grain, HTS 4408.90.01.61 specific to birch veneers ≤6mm.