Spliced Red Oak Veneer Sheets
Thin sheets of red oak (Quercus spp.) wood, sawn lengthwise, sliced to a thickness not exceeding 6 mm, and spliced together edge-to-edge for seamless coverage. These are used primarily for veneering plywood and other laminated wood products in furniture manufacturing. Classified under HTS 4408.90.01.31 due to being spliced red oak veneer sheets.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not spliced or end-jointed
Un-spliced red oak veneer sheets fall under the non-spliced coniferous/other wood subheading.
If for thicker sawn lumber >6mm
Red oak lumber exceeding veneer thickness limits moves to sawn wood headings.
If further processed into plywood
Completed plywood panels with red oak veneer face are classified as finished plywood products.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Quercus spp. red oak with phytosanitary certificates to meet ISPM 15 standards
• Declare exact thickness (≤6mm) and splicing method on commercial invoice to avoid reclassification
• Check for end-jointing details; excessive binders may shift to fuel pellet categories under 4401
Related Products under HTS 4408.90.01.31
End-Jointed Red Oak Cabinet Veneer
Red oak veneer sheets sliced to under 6 mm thickness, end-jointed for length extension, ideal for high-end kitchen cabinetry facing. The splicing ensures uniform panels without defects for laminated wood applications. Fits HTS 4408.90.01.31 as end-jointed red oak sheets for veneering.
Planed Spliced Red Oak Furniture Veneer
Sliced red oak sheets ≤6 mm thick, planed smooth and spliced for furniture veneering like tabletops and doors. The surface preparation enhances adhesion for plywood lamination. HTS 4408.90.01.31 covers these processed red oak veneers.
Sanded End-Jointed Red Oak Door Veneer
Red oak (Quercus spp.) veneer peeled to <6 mm, end-jointed and sanded for interior door skins in laminated constructions. Provides consistent grain for architectural millwork. Classified in 4408.90.01.31 for sanded, jointed red oak sheets.
Red Oak Quarter-Sawn Spliced Veneer Panels
Quarter-sawn red oak sheets sliced lengthwise to ≤6 mm, spliced for stability in high-end flooring underlay or wall panels. The cut minimizes expansion for laminated wood use. HTS 4408.90.01.31 applies to these spliced red oak veneers.
Book-Matched Red Oak End-Jointed Veneer
End-jointed red oak veneer sheets ≤6 mm thick, book-matched for symmetrical grain patterns in custom furniture. Splicing allows larger panels from sliced logs. Meets 4408.90.01.31 for jointed red oak veneering sheets.