End-Jointed Cherry Wood Veneer for Plywood
End-jointed cherry veneer panels are sliced cherry wood sheets (thickness ≤6mm), finger-jointed at ends for length extension, sanded for smoothness, and used in laminated plywood manufacturing. This HTS 4408.90.01.15 classification applies because it's cherry (Prunus spp.) wood, processed via slicing/peeling, and specifically end-jointed for veneering purposes.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness exceeds 6mm
Veneer sheets thicker than 6mm are classified under coniferous or other non-specified wood veneers in the broader category.
If sawn lengthwise but not sliced/peeled for veneering
Thicker lumber sawn lengthwise (not thin veneers) from nonconiferous woods like cherry goes to heading 4407 for sawn wood.
If assembled into finished laminated panels
Once glued or laminated into complete sheets for construction, it becomes 'sheets for veneering' under 4418, excluding raw veneers.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide lab certification confirming cherry species and binder-free joints if applicable; declare exact thickness and jointing method to prevent duty disputes; check ISPM 15 compliance for wood packaging during import
Related Products under HTS 4408.90.01.15
Spliced Cherry Veneer Sheets for Cabinetry
These are thin cherry wood veneer sheets (under 6mm thick) obtained by slicing, planed and sanded, then spliced together edge-to-edge to create wider panels suitable for high-end cabinet doors and furniture. Classified under HTS 4408.90.01.15 due to being cherry (Prunus spp.), spliced or end-jointed, and specifically for veneering or plywood applications. The splicing allows for seamless large surfaces while maintaining the premium cherry grain.
Planed Spliced Cherry Veneer for Furniture Facing
High-quality spliced cherry veneer sheets, sliced from Prunus logs, planed and sanded to ≤6mm thickness, edge-spliced for uniform widths ideal for facing drawer fronts and tabletops. Falls under 4408.90.01.15 as spliced cherry wood specifically prepared for plywood or similar laminates.
Sanded End-Jointed Cherry Veneer Panels
These cherry (Prunus spp.) veneer panels are peeled from logs, end-jointed for extended lengths, sanded smooth, and maintained at under 6mm for use in custom plywood overlays. HTS 4408.90.01.15 covers this as 'other' spliced/end-jointed cherry wood for veneering.
Cherry Book-Match Spliced Veneer Sheets
Book-matched spliced cherry veneer features mirrored grain patterns from sequential slices, edge-spliced, ≤6mm thick, planed for premium furniture and interior paneling. Precisely classified in 4408.90.01.15 for cherry Prunus spp. veneers that are spliced.
Finger-Jointed Cherry Veneer for Door Skins
Finger-jointed cherry veneer sheets, sliced and peeled to ≤6mm, end-jointed for stability, used as door skins in laminated wood assemblies. HTS 4408.90.01.15 applies to this spliced/end-jointed cherry (Prunus) for plywood-like uses.
Premium Spliced Cherry Quarter-Sawn Veneer
Quarter-sawn cherry veneer, sliced lengthwise to ≤6mm, spliced for width, sanded revealing straight grain for architectural millwork. Classified under 4408.90.01.15 as cherry Prunus spp. processed for veneering.